Axis Communications P1354-E Accessing the Product Set Power Line Frequency, PTZ Mode, Live View

Page 13

AXIS P1354–E Network Camera

Accessing the Product

Set Power Line Frequency

Power line frequency is set the first time the Axis product is accessed and can only be changed from Plain Config (see page 54) or by resetting the product to factory default.

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of the world use 50 Hz. Local variations may apply, always check with the local authorities.

PTZ Mode

PTZ mode is set the first time the Axis product is accessed and can only be changed by resetting the product to factory default.

Digital PTZ is the default mode and should be used when a pan/tilt motor is not used.

If the camera is mounted to a pan/tilt motor, select Uploadable PTZ driver. For information about how to upload a PTZ driver, see Installing a PTZ driver, on page 32.

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

13

Image 13

Contents Axis P1354-E Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsLearn More SupportAxis P1354-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis P1354-E Network Camera Connectors Status LED when using Focus Assistant LED IndicatorsReplacing the lens Color IndicationUnscrew the standard lens Attach and screw on the new lens Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificatePTZ Mode Accessing the Product Set Power Line FrequencyLive View Controls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAMC Audio Controls PTZ ControlsAxis P1354-E Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup FocusVideo and Audio Video and AudioVideo Stream Pixel Counter264 ImageVideo and Audio Stream Profiles Camera SettingsIris adjustment Iris configurationShutter & Gain Set Shutter toView Area Image SettingsOverlay Day/NightPrivacy Mask Audio SettingsOverlay Image Go to Video & Audio Overlay ImageAudio Input Audio ModesAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P1354-E Network Camera Installing a PTZ driver Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomGuard Tour Device SettingsAdvanced ControlsControl Queue Operator Same as administrator but with lower priorityDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Schedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add Events RecurrencesRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Date & TimeAudio Support CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkLinux/Unix syntax Assign IP Address using ARP/PingLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts COM PortSupport MaintenancePlain Config Reset to Factory Default SettingsScripting File UploadAxis P1354-E Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyVideo and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsBuilt-in Microphone Specification Network Security Function/group Specifications Audio Audio streamingMaintenance Audio inputPower Function/group Specifications Installation aidsConnectors DimensionsTerminal connector Technical Specifications ConnectorsFunction Pin Specifications Power connectorRS-485/422 connector Audio connectorPerformance Considerations Audio Input Audio OutputM2.2