Axis Communications P1354-E user manual Guard Tour, Advanced, Device Settings, Controls

Page 33

AXIS P1354–E Network Camera

PTZ (Pan Tilt Zoom)

To install the PTZ driver go to PTZ> Driver Selection. Browse to find the driver (e.g. driver.ptz) and Upload. If the driver was successfully uploaded, it appears in the Select driver to use drop-down list. From this drop-down list, select the driver to install or remove, and click Save.

Select Activate PTZ to enable PTZ. The address of the connected device appears against Device ID. Choose the Device type from the drop-down list. To find which device type to use, consult the documentation supplied by the PTZ driver.

To complete the installation go to System Options > Ports & Devices > COM Port (see COM Port) and verify the settings.

Guard Tour

A guard tour displays the video stream from different preset positions, one-by-one, in a predetermined order or at random and for configurable time periods. The enabled guard tour will keep running after the user has logged off or closed the browser.

To add a guard tour:

1.Go to PTZ > Guard Tour and click Add.

2.Enter a descriptive name.

3.Specify the pause length between runs.

4.Select an available preset position and click Apply.

5.Specify the View Time in seconds or minutes.

6.Specify the View Order or select the Random view order option.

7.Click Save.

To modify or remove guard tours, go to PTZ > Guard Tour, select the guard tour in the Guard Tour List and click Modify/Remove.

For more information see the online help .

Note

This Axis product supports limited guard tours. The pause between successive guard tours must be set to at least 10 minutes.

Advanced

Device Settings

The Device Settings window displays driver specific settings. The appearance of this window can vary depending on the driver installed. Options that can be configured include:

Driver Specific Settings from Video Source

Mechanical Limits for Moving Video Source

Light Control Video Source

Extended Driver Specific Settings for Video Source

For download and installation information about PTZ drivers for your Axis product please visit www.axis.com/techsup/

Controls

Panel Shortcut Command Buttons can be configured to provide direct access to commands issued via the VAPIX® Application Programming Interface. The buttons will be displayed in the PTZ control panel, which is available in the Live View page through the Ctrl panel button, see page 15.

Deselect the options under Enable/Disable controls to disable the pan, tilt, zoom and focus controls.

33

Image 33
Contents Axis P1354-E Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsLearn More SupportAxis P1354-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis P1354-E Network Camera Connectors Status LED when using Focus Assistant LED IndicatorsReplacing the lens Color IndicationUnscrew the standard lens Attach and screw on the new lens Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateAccessing the Product Set Power Line Frequency PTZ ModeLive View Controls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAMC Audio Controls PTZ ControlsAxis P1354-E Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup FocusVideo and Audio Video and AudioVideo Stream Pixel Counter264 ImageVideo and Audio Stream Profiles Camera SettingsIris adjustment Iris configurationShutter & Gain Set Shutter toView Area Image SettingsOverlay Day/NightPrivacy Mask Audio SettingsOverlay Image Go to Video & Audio Overlay ImageAudio Input Audio ModesAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P1354-E Network Camera Installing a PTZ driver Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomGuard Tour Device SettingsAdvanced ControlsControl Queue Operator Same as administrator but with lower priorityDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Schedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add Events RecurrencesRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Date & TimeAudio Support CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkLinux/Unix syntax Assign IP Address using ARP/PingLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts COM PortSupport MaintenancePlain Config Reset to Factory Default SettingsScripting File UploadAxis P1354-E Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyVideo and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsBuilt-in Microphone Specification Network Security Function/group Specifications Audio Audio streamingMaintenance Audio inputPower Function/group Specifications Installation aidsConnectors DimensionsTerminal connector Technical Specifications ConnectorsFunction Pin Specifications Power connectorRS-485/422 connector Audio connectorPerformance Considerations Audio Input Audio OutputM2.2