Axis Communications P1354-E user manual LED Indicators, Status LED when using Focus Assistant

Page 9

AXIS P1354–E Network Camera

Hardware Overview

RS-485/RS-422 connector - Two 2-pin terminal blocks for RS-485/RS-422 serial interface used to control auxiliary equipment, e.g. PTZ devices.

LED Indicators

LED	Color	Indication

Network	Green	Steady for connection to a 100 MBit/s network. Flashes for network activity.

	Amber	Steady for connection to a 10 MBit/s network. Flashes for network activity.

	Unlit	No network connection.

Status	Green	Steady green for normal operation.

	Amber	Steady during startup and when restoring settings.

	Red	Slow flash for failed upgrade.

Power	Green	Normal operation.

	Amber	Flashes green/amber during firmware upgrade.

	LED	Color	Indication

	Housing	Green	Normal operation.
	(fan and
	(fan and	Flashing	Single flash: Heater error
	heater)	Flashing	Single flash: Heater error
	heater)	green	Double flash: Fan error
		green	Double flash: Fan error
			Triple flash: General error
			Alarm events will be triggered through the camera’s input port.
			Contact your Axis reseller for information about spare parts and troubleshooting.

Note

•The Status LED can be configured to be unlit during normal operation. To configure, go to Setup > System Options > Ports & Devices > LED. See the online help for more information.

•The Status LED can be configured to flash while an event is active.

•The Status LED can be configured to flash for identifying the unit. Go to Setup > System Options > Maintenance .

Status LED when using Focus Assistant

Status	Color	Indication

	Green	Focus Assistant is enabled
		The lens is optimally adjusted

	Amber	The camera has been moved, or an object has been inserted in front of the lens. Exit and
		restart the Focus Assistant.
		The lens is less optimally adjusted

	Red	The camera has been moved, or an object has been inserted in front of the lens. Exit and
		restart the Focus Assistant.
		The lens is poorly adjusted

Replacing the lens

It is possible to use optional lenses for the Axis product.

To replace the lens:

1. Disconnect the iris cable.

9

Image 9

Contents Axis P1354-E Network Camera Liability About this documentIntellectual Property Rights Equipment ModificationsLearn More SupportAxis P1354-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis P1354-E Network Camera Connectors Status LED when using Focus Assistant LED IndicatorsReplacing the lens Color IndicationUnscrew the standard lens Attach and screw on the new lens Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Accessing the Product Access from the InternetNetwork TCP/IP Advanced Click Create self-signed certificateAccessing the Product Set Power Line Frequency PTZ ModeLive View Controls on the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerAMC Audio Controls PTZ ControlsAxis P1354-E Network Camera Media Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Accessing Audio Streams Setting Up the Product Setting Up the ProductBasic Setup FocusVideo and Audio Video and AudioVideo Stream Pixel Counter264 ImageVideo and Audio Stream Profiles Camera SettingsIris adjustment Iris configurationShutter & Gain Set Shutter toView Area Image SettingsOverlay Day/NightPrivacy Mask Audio SettingsOverlay Image Go to Video & Audio Overlay ImageAudio Input Audio ModesAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Go to Setup Live View Config Viewer SettingsUser Defined Links Output ButtonsAxis P1354-E Network Camera Installing a PTZ driver Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomGuard Tour Device SettingsAdvanced ControlsControl Queue Operator Same as administrator but with lower priorityDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsAudio Detection Default valuesLow level 0% Recommended valuesApplications ApplicationsEvents EventsSetting Up an Action Rule PTZ ControlGo to Events Action Rules and click Add Schedules RecipientsRecipient Use with action Go to Events Recipients and click AddGo to Events Recurrences and click Add Events RecurrencesRecordings RecordingsRecording List Continuous RecordingSystem Options System OptionsSecurity UsersIeee Date & TimeAudio Support CertificatesIPv4 Address Configuration Basic TCP/IP SettingsIPv6 Address Configuration NetworkLinux/Unix syntax Assign IP Address using ARP/PingLinux/Unix example Axis Video Hosting System AvhsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceUPnPTM StorageRTP/H.264 BonjourNetwork Share Ports & DevicesPorts COM PortSupport MaintenancePlain Config Reset to Factory Default SettingsScripting File UploadAxis P1354-E Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallyVideo and image problems, general Status and Network indicator LEDs are flashing red rapidlySetup Video & Audio Camera Settings SettingsTechnical Specifications Technical SpecificationsBuilt-in Microphone Specification Network Security Function/group Specifications Audio Audio streamingMaintenance Audio inputPower Function/group Specifications Installation aidsConnectors DimensionsTerminal connector Technical Specifications ConnectorsFunction Pin Specifications Power connectorRS-485/422 connector Audio connectorPerformance Considerations Audio Input Audio OutputM2.2