Axis Communications P1354-E user manual Recordings, Recording List, Continuous Recording

Page 43

AXIS P1354–E Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

•To start a continuous recording, see page 43.

•To set up action rules, see page 40.

•To access recordings, see Recording List, on page 43.

•To configure camera controlled storage, see Storage, on page 51.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage, on page 51 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings. If a new stream profile is selected while a recording is ongoing, the recording will be stopped and saved in the recording list and a new recording with the new stream profile will start. All previous continuous recordings will remain in the recording list until they are removed manually or through automatic removal of old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Axis P1354-E Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsLearn More SupportAxis P1354-E Network Camera Table of ContentsTechnical Specifications Hardware Overview Hardware OverviewAxis P1354-E Network Camera Connectors Color Indication LED IndicatorsStatus LED when using Focus Assistant Replacing the lensUnscrew the standard lens Attach and screw on the new lens Accessing the Product Accessing the ProductAccess from a Browser Click Create self-signed certificate Accessing the Product Access from the InternetSet the Root Password Network TCP/IP AdvancedPTZ Mode Accessing the Product Set Power Line FrequencyLive View Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbarAMC Audio Controls PTZ ControlsAxis P1354-E Network Camera Axis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Accessing Audio Streams Focus Setting Up the ProductSetting Up the Product Basic SetupPixel Counter Video and AudioVideo and Audio Video Stream264 ImageVideo and Audio Stream Profiles Camera SettingsSet Shutter to Iris configurationIris adjustment Shutter & GainDay/Night Image SettingsView Area OverlayGo to Video & Audio Overlay Image Audio SettingsPrivacy Mask Overlay ImageAudio Input Audio ModesAudio Output Audio ClipsLive View Config Live View ConfigDefault Viewer for Browsers Output Buttons Viewer SettingsGo to Setup Live View Config User Defined LinksAxis P1354-E Network Camera PTZ Pan Tilt Zoom Preset PositionsInstalling a PTZ driver Go to PTZ Preset PositionsControls Device SettingsGuard Tour AdvancedControl Queue Operator Same as administrator but with lower priorityMotion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesAudio Detection Low level 0%Applications ApplicationsEvents EventsPTZ Control Setting Up an Action RuleGo to Events Action Rules and click Add Go to Events Recipients and click Add RecipientsSchedules Recipient Use with actionGo to Events Recurrences and click Add Events RecurrencesContinuous Recording RecordingsRecordings Recording ListUsers System OptionsSystem Options SecurityCertificates Date & TimeIeee Audio SupportNetwork Basic TCP/IP SettingsIPv4 Address Configuration IPv6 Address ConfigurationAxis Video Hosting System Avhs Assign IP Address using ARP/PingLinux/Unix syntax Linux/Unix exampleAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsSmtp email QoS Quality of ServiceBonjour StorageUPnPTM RTP/H.264COM Port Ports & DevicesNetwork Share PortsSupport MaintenanceFile Upload Reset to Factory Default SettingsPlain Config ScriptingAxis P1354-E Network Camera Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with streaming H.264 Product is accessible locally but not externallySettings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsTechnical Specifications Technical SpecificationsAudio input Function/group Specifications Audio Audio streamingBuilt-in Microphone Specification Network Security MaintenanceDimensions Function/group Specifications Installation aidsPower ConnectorsPower connector Technical Specifications ConnectorsTerminal connector Function Pin SpecificationsAudio Input Audio Output Audio connectorRS-485/422 connector Performance ConsiderationsM2.2
Top Page Image Contents