6 | en VG4 Firmware Updates via a TCP/IP Network | AutoDome Modular Camera System |
|
|
|
4.Click the Maintenance link below the Service link.
Figure 1.3 Service Settings Maintenance option
5.Refer to the following sections, depending on the VG4 IP AutoDome series you need to update:
–VG4 100 Series IP AutoDome: Section 1.6 Updating VG4 100 Series IP AutoDome Firmware, page 6
–VG4 200, 300 or 500i Series IP AutoDome: Section 1.6 Updating VG4 100 Series IP AutoDome Firmware, page 6
1.6 | Updating VG4 100 Series IP AutoDome Firmware |
CAUTION! Updating the firmware erases all device settings. To save these settings, click the
! Configuration download button to save the current device settings and then upload this file after the completion of the firmware update.
1. Click the Search button next to the Maintenance pane Firmware Upload field; then browse to the directory that contains the firmware files.
2. Select the appropriate image (.img) file for your Device Model and Video Type; then click OK.
3. Click the Upload button.
4. Click OK to the warning message to continue the firmware upload, or click Cancel to stop the upload. The page displays a progress bar as the firmware is uploaded.
CAUTION! Do not perform any action, click any object, or minimize the Internet Explorer
!browser window during the firmware upload.
Note: Once the progress bar reaches 100% the system opens the reset page. Allow the reset page to complete its action.
5.The VG4 100 Series IP AutoDome firmware update is complete.
F.01U.097.269 1.06 2011.09 | Firmware Update Manual | Bosch Security Systems, Inc. |