Bosch Appliances VG4 Launching with a RS232/RS485 Serial Connection, Ctfid Detect Device Screen

Page 22

18 en VG4 Firmware Updates via the CTFIDAutoDome Modular Camera System

2.4.2	Launching with a RS232/RS485 Serial Connection
	If using a RS232/RS485 serial connection, use the following instructions to launch the CTFID
	software.
	1.	Double-click the CTFID icon on the Windows Desktop.
	2.	Click Cancel to select an alternate interface.

i

Figure 2.5 CTFID Detect Device Screen

3.Click the Select an alternate interface radio button and click Continue.

\

Figure 2.6 Alternate Interface dialog box

4.Ensure that the Serial radio button is selected.

5.Select the COM Port that is connected to the DB9 connector.

6.Accept the default baud rate.

Note: If unable to connect, make sure the VG4 AutoBaud setting is turned on.

Figure 2.7 Select Interface dialog box

NOTICE! The VP-RS2BLNX device is not available in the United States.

F.01U.097.269 1.06 2011.09

Firmware Update Manual

Bosch Security Systems, Inc.

Image 22

Contents AutoDome Modular Camera System Page Table of Contents Iv en Table of Contents AutoDome Modular Camera System 1VG4 Firmware Updates via a TCP/IP Network Determining the IP Communications ModuleTo determine the IP Communications Module 2Upgrading the IP AutoDomeHardware Version IP Communications Module Firmware Version Supporting Software Requirements Upgrading the VG4 100 Series AutoDomeDetermining Minimum Requirements 200, 300, 500i Series Release Firmware Version Release DateSelecting the Service Pack Beginning the Firmware Update Process Select Settings linkService Settings Maintenance option Updating VG4 100 Series IP AutoDome FirmwareOrder to Upload Files Updating VG4 200, 300 or 500i Series IP AutoDome FirmwareFile Name AutoDome Series/Module Function With. See .4.2 Selecting the Service Pack, Selecting and Uploading Firmware FilesSymbol Description Select a Firmware file to uploadUpload progress bar Alternate Language Option 10 Language folderChanging the VG4 AutoDome OSD Language Exit the Language menu and then the Main menuVG4 Firmware Updates via the Ctfid Upgrading the VG4 200 or 300 Series AutoDome Determining Minimum Requirements System Controller Main Start with Service Pack Release Date 2Selecting the Service Pack 3Hardware Connections 1Bilinx Connections 2Serial ConnectionsLaunching the Ctfid Software Launching with a Bilinx ConnectionLaunching with a RS232/RS485 Serial Connection Ctfid Detect Device ScreenDownloading AutoDome Device Settings Uploading a VG4 100 Series AutoDome Service Pack Uploading VG4 AutoDome Firmware FilesUploading a VG4 200 or VG4 300 Series AutoDome Service Pack 10 Select VG4 100 Series Firmware Image FileMust start with. See .2.2 Selecting the Service Pack, on 5Updating the SC Boot file 12 Choose a Service Pack14 Service Pack subcomponents 15 Firmware Update Warning 17 Successful SCBoot Upgrade Updating the SC Main Files19 Firmware upgrade warning Click OK to complete the upgrade process Additional Language Option 22 Select Language folderFrom the Ctfid Main window Pre-production Firmware Versions All Models VG4 Series Firmware Version IdentificationModule Name Filename Web Browser IssuesVG4 AutoDome with an IP Communications Module Microsoft Internet Explorer version3IP Firmware Upgrade Fails IP Firmware Update ErrorVCA App File Fails Upload Upgrading Firmware with the Ctfid Ctfid does not Connect4Firmware Upgrade via Ctfid Fails Serial RS232 or RS4855Auto Tracker Does not Activate with on 78 Enter Page USA