Axis Communications M1034-W user manual Controls on the Live View

Page 11

AXIS M1034-W Network Camera

Accessing the Product

Select the power line frequency (50 Hz or 60 Hz) used at the location of the Axis product. Selecting the wrong frequency may cause image flicker if the product is used in fluorescent light environments.

When using 50 Hz, the maximum frame rate is limited to 25 fps.

Note

Power line frequency is different in different geographic regions. In the Americas, 60 Hz is usually used; most other parts of the world use 50 Hz. Local variations may apply, always check with the local authorities.

The Live View Page

The controls and layout of the Live View page may have been customized to meet specific installation requirements and user preferences. Consequently, some of the examples and functions featured here may differ from those displayed in your own Live View page. The following provides an overview of each available control.

Controls on the Live View Page

Click View size to scale the image down to 800 pixels wide or to full scale. Only available in MJPEG.

The Stream Profile drop-down list allows you to select a customized or pre-programmed stream profile. Stream profiles are configured under Video & Audio > Stream Profiles. See Stream Profiles, on page 19.

Click Pulse to activate the built-in light for a defined period of time, for example 20 seconds.

Click the Active/Inactive buttons to manually turn the built-in light on and off.

Use the Slider to control the brightness of the built-in light, slide left to dim and slide right do to brighten.

Click Pulse to activate the output for a defined period of time, such as switching on an external light for 20 seconds.

Click the Active/Inactive buttons to manually start and stop a connected device — e.g. switch an external light on and off.

The Manual Trigger button is used to trigger an action rule from the Live View page; see page 12. Enable this button from Live View Config > Action Buttons.

Click Snapshot to save a snapshot of the video image. Right-click the video image to save it in JPEG format on your computer. This button is primarily intended for use when the AXIS Media Control viewer toolbar is not available. Enable this button from Live View Config > Action Buttons.

The Audio clip drop-down list allows you to play an audio clip from the Live View page. Select the audio clip and click the Play button.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Axis M1034-W Network Camera Equipment Modifications About this documentLiability Intellectual Property RightsLearn More SafetySupport Axis M1034-W Network Camera Table of ContentsPerformance Considerations Hardware Overview ConnectorsHardware Overview Color Indication LED IndicatorsPower connector Mini DC connector Axis M1034-W Network Camera Start a browser Internet Explorer, Firefox, Safari Accessing the ProductAccessing the Product Access from a BrowserNetwork TCP/IP Advanced Access from the InternetSet the Root Password Set Power Line FrequencyControls on the Live View Live ViewTo show the manual trigger buttons in the Live View Go to Setup EventsAxis Media Control viewer toolbar Manual TriggerPTZ Controls Half-duplex modeAxis Media Control AMC How to Stream H.264Media Streams Media StreamsQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsBasic Setup Setting Up the ProductSetting Up the Product Pixel Counter Video and AudioVideo and Audio Video Stream264 Click Save to apply the new settingsStream Profiles ImageImage Appearance Camera SettingsExposure Settings View AreaGo to Video & Audio Video Stream and select the Image tab Date/Time Formats in the online help To enable overlaysOverlay Overlay ImageAudio Input Audio SettingsPrivacy Mask Audio ModesG711 G726 Audio ClipsAudio Output Live View Config Default Viewer for BrowsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links Light ButtonsOutput Buttons Go to Setup Live View ConfigPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls Operator Same as administrator but with lower priorityAdvanced Control QueueMotion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsPIR Sensor Audio DetectionEvents EventsPTZ Control Setting Up an Action RuleRecurrences RecipientsSchedules Axis M1034-W Network Camera Continuous Recording RecordingsRecordings Recording ListAxis M1034-W Network Camera Users System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Certificates Click Install certificate and upload the certificateDate & Time Audio SupportNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsWireless Settings WirelessWireless Network Status WPATM-/WPA-Enterprise WPATM-/WPA2TM-PSKNo Security EAP-PEAP/MSCHAPv2Certificates QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMPorts & Devices MaintenanceStorage Logs & Reports SupportSupport Overview System OverviewPlain Config Reset to Factory Default SettingsScripting File UploadChecking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Problems with the H.264 format Product is accessible locally but not externallyProblems uploading files Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Setup Video & Audio Camera SettingsPoor audio quality SettingsMotion Detection triggers unexpectedly No audioTechnical Specifications Technical SpecificationsFunction/group Specifications Network Maintenance Installation aidsPower ConnectorsTerminal connector DimensionsHxWxD Weight AccessoriesPerformance Considerations M2.3
Top Page Image Contents