Axis Communications M1034-W user manual Recordings, Recording List, Continuous Recording

Page 36

AXIS M1034-W Network Camera

Recordings

Recordings

The Axis product can be configured to record video continuously or according to an action rule:

To start a continuous recording, see page 36.

To set up action rules, see page 33.

To access recordings, see Recording List, on page 36.

To configure camera controlled storage, see Storage, on page 49.

Recording List

Recorded videos are listed on the Recordings > List page. The list shows each recording’s start date and time, duration and the event that triggered the recording.

To play or download a recording, follow these steps:

1.Go to Recordings > List.

2.Use the filter to narrow the list of recordings. Enter the desired filter criteria and click Filter. Some filters may take a long time to complete.

3.Select the recording.

4.Click Play to play the recording, or click Download to download the recording.

Multiple recordings can be downloaded at the same time. Select the recordings and click Download. The downloaded file is a zip file containing a minimum of three files, of which the Matroska (mkv) files are the actual recordings. The recordings are time-stamped with the date and time they were downloaded (that is, not the date the recordings were made).

Note

To play recordings in Windows Media Player, AXIS Matroska File Splitter must be installed. AXIS Matroska File Splitter can be downloaded from www.axis.com/techsup/software

For detailed recording and video information, select a recording and click Properties.

To remove a recording, select the recording and click Remove.

Continuous Recording

The Axis product can be configured to continuously save video to a storage device. See Storage, on page 49 for more information about storage devices. To prevent the disk from becoming full, it is recommended to configure the disk to automatically remove old recordings.

To start a continuous recording, follow these steps:

1.Go to Recordings > Continuous.

2.Select Enabled.

3.Select type of storage device from the Disk list.

4.Select a Stream profile to use for continuous recordings.

5.Click Save to save and start the recording.

36

Image 36
Contents Axis M1034-W Network Camera About this document LiabilityIntellectual Property Rights Equipment ModificationsSafety SupportLearn More Table of Contents Axis M1034-W Network CameraPerformance Considerations Connectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Axis M1034-W Network Camera Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsHow to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterClick Save to apply the new settings Stream ProfilesImage 264Camera Settings Exposure SettingsView Area Image AppearanceDate/Time Formats in the online help To enable overlays OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabAudio Settings Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputG711 G726 Default Viewer for Browsers Live View ConfigLive View Config Viewer Settings User Defined LinksLight Buttons Browser Viewer DescriptionGo to Setup Live View Config Output ButtonsPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomOperator Same as administrator but with lower priority AdvancedControl Queue ControlsDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAudio Detection PIR SensorEvents EventsSetting Up an Action Rule PTZ ControlRecipients SchedulesRecurrences Axis M1034-W Network Camera Recordings RecordingsRecording List Continuous RecordingAxis M1034-W Network Camera System Options System OptionsSecurity UsersIeee CertificatesClick Install certificate and upload the certificate Date & TimeAudio Support Go to System Options Security CertificatesBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Https NAT traversal port mapping for IPv4Wireless Wireless Network StatusWireless Settings WPATM-/WPA2TM-PSK WPATM-/WPA-EnterpriseEAP-PEAP/MSCHAPv2 No SecurityQoS Quality of Service CertificatesUPnPTM can be disabled under System Options Network UPnPTM Smtp emailUPnPTM RTP/H.264Maintenance StoragePorts & Devices Support Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings ScriptingFile Upload Plain ConfigTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading filesSettings Motion Detection triggers unexpectedlyNo audio Poor audio qualityTechnical Specifications Technical SpecificationsMaintenance Installation aids PowerConnectors Function/group Specifications NetworkDimensions HxWxD WeightAccessories Terminal connectorPerformance Considerations M2.3