Axis Communications M1034-W user manual Technical Speciﬁcations

Page 57

AXIS M1034-W Network Camera

Technical Speciﬁcations

Technical Speciﬁcations

Function/group	Item	Speciﬁcations

Camera	Model	AXIS M1034-W
	Image sensor	1/4" Progressive scan RGB CMOS
	Lens	2.8 mm, F2.0 ﬁxed iris
		Horizontal angle of view: 80°
		Vertical angle of view: 51°
	Minimum	1.2 - 10000 lux, F2.0
	illumination	0 lux with illumination LED on
	Shutter time	1/8000 s to 1/6 s
	Pan/Tilt/Zoom	Digital PTZ, preset positions, guard tour

Video	Video	H.264 (MPEG-4 Part 10/AVC, Main proﬁle)
	compression	Motion JPEG
	Resolutions	1280x800 to 352x240
	Frame rate H.264	30 fps in all resolutions
	Frame rate	30 fps in all resolutions (performance may be reduced in wireless mode)
	Motion JPEG
	Video streaming	Multiple, individually conﬁgurable streams in H.264 and Motion JPEG
		Controllable frame rate and bandwidth
		VBR/CBR H.264
	Image settings	Compression, color, brightness, sharpness, contrast, white balance, backlight
		compensation
		Rotation: 0°, 90° 180° 270°
		Mirroring of images
		Text and image overlay
		Privacy mask
		Axis’ Corridor Format

Audio	Audio streaming	Two-way
	Audio	AAC LC 8 kHz 32 kbit/s, 16 kHz 64 kbit/s
	compression	G.711 PCM 8 kHz 64 kbit/s
		G.726 ADPCM 8 kHz 32 kbit/s or 24 kbit/s
		Conﬁgurable bit rate
	Audio input	Built-in microphone
	Audio output	Built-in speaker
	Built-in	Sensitivity: -36 dB ±2 dB (0 dB = 1 V/Pa, 1 kHz)
	microphone	Max input (SPL): 100 dB
	speciﬁcation

57

Image 57

Contents Axis M1034-W Network Camera Liability About this documentIntellectual Property Rights Equipment ModiﬁcationsSafety SupportLearn More Axis M1034-W Network Camera Table of ContentsPerformance Considerations Connectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Axis M1034-W Network Camera Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariSet the Root Password Access from the InternetSet Power Line Frequency Network TCP/IP AdvancedControls on the Live View Live ViewAxis Media Control viewer toolbar Go to Setup EventsManual Trigger To show the manual trigger buttons in the Live ViewPTZ Controls Half-duplex modeMedia Streams How to Stream H.264Media Streams Axis Media Control AMCQuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamJava applet supports simplex audio with G.711 encoding Accessing Audio StreamsSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterStream Proﬁles Click Save to apply the new settingsImage 264Exposure Settings Camera SettingsView Area Image AppearanceOverlay Date/Time Formats in the online help To enable overlaysOverlay Image Go to Video & Audio Video Stream and select the Image tabPrivacy Mask Audio SettingsAudio Modes Audio InputAudio Clips Audio OutputG711 G726 Default Viewer for Browsers Live View ConﬁgLive View Conﬁg User Deﬁned Links Viewer SettingsLight Buttons Browser Viewer DescriptionOutput Buttons Go to Setup Live View ConﬁgGo to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced Operator Same as administrator but with lower priorityControl Queue ControlsDetectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsPIR Sensor Audio DetectionEvents EventsPTZ Control Setting Up an Action RuleRecipients SchedulesRecurrences Axis M1034-W Network Camera Recordings RecordingsRecording List Continuous RecordingAxis M1034-W Network Camera System Options System OptionsSecurity UsersCertiﬁcates IeeeDate & Time Click Install certiﬁcate and upload the certiﬁcateAudio Support Go to System Options Security CertiﬁcatesNetwork Basic TCP/IP SettingsAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 HttpsWireless Wireless Network StatusWireless Settings WPATM-/WPA-Enterprise WPATM-/WPA2TM-PSKNo Security EAP-PEAP/MSCHAPv2Certiﬁcates QoS Quality of ServiceSmtp email UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Maintenance StoragePorts & Devices Support Overview SupportSystem Overview Logs & ReportsScripting Reset to Factory Default SettingsFile Upload Plain ConﬁgTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyVideo and image problems, general Status and Network indicator LEDs are ﬂashing red rapidlySetup Video & Audio Camera Settings Problems uploading ﬁlesMotion Detection triggers unexpectedly SettingsNo audio Poor audio qualityTechnical Speciﬁcations Technical SpeciﬁcationsPower Maintenance Installation aidsConnectors Function/group Speciﬁcations NetworkHxWxD Weight DimensionsAccessories Terminal connectorPerformance Considerations M2.3