Axis Communications M1034-W Axis Media Control viewer toolbar, Manual Trigger, Go to Setup Events

Page 12

AXIS M1034-W Network Camera

Accessing the Product

Manual Trigger

The Manual Trigger is used to trigger an action rule from the Live View page. The manual trigger can for example be used to validate actions during product installation and conﬁguration.

To conﬁgure the manual trigger:

1.Go to Setup > Events.

2.Click Add to add a new action rule.

3.From the Trigger drop-down list, select Input Signal.

4.From the second drop-down list, select Manual Trigger.

5.Select the desired action and conﬁgure the other settings as required. For more information about action rules, see Events, on page 32.

To show the manual trigger buttons in the Live View page:

1.Go to Setup > Live View Layout.

2.Under Action Buttons, select Show manual trigger button.

AXIS Media Control viewer toolbar

The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 14 for more information. The toolbar displays the following buttons:

The Play button connects to the Axis product and starts playing a media stream.

The Stop button stops the media stream.

The Snapshot button takes a snapshot of the video image. The location where the image is saved can be speciﬁed in the AMC Control Panel.

Click the View Full Screen button and the video image will ﬁll the entire screen. Press ESC (Escape) on the computer keyboard to cancel full screen view.

The Record button is used to record the current video stream. The location where the recording is saved can be speciﬁed in the AMC Control Panel.

AMC Audio Controls

AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when audio is enabled.

Speaker button — Click to turn the speakers on or off.

Microphone button – Click to mute or unmute the microphone. In Simplex - speaker only mode, the Microphone and Talk buttons must both be active to send audio to the Axis product. Click either button to stop audio transmission.

12

Image 12

Contents Axis M1034-W Network Camera About this document LiabilityIntellectual Property Rights Equipment ModiﬁcationsSafety SupportLearn More Table of Contents Axis M1034-W Network CameraPerformance Considerations Connectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Axis M1034-W Network Camera Accessing the Product Accessing the ProductAccess from a Browser Start a browser Internet Explorer, Firefox, SafariAccess from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedLive View Controls on the Live ViewGo to Setup Events Axis Media Control viewer toolbarManual Trigger To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsHow to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video and Audio Video and AudioVideo Stream Pixel CounterClick Save to apply the new settings Stream ProﬁlesImage 264Camera Settings Exposure SettingsView Area Image AppearanceDate/Time Formats in the online help To enable overlays OverlayOverlay Image Go to Video & Audio Video Stream and select the Image tabAudio Settings Privacy MaskAudio Modes Audio InputAudio Clips Audio OutputG711 G726 Default Viewer for Browsers Live View ConﬁgLive View Conﬁg Viewer Settings User Deﬁned LinksLight Buttons Browser Viewer DescriptionGo to Setup Live View Conﬁg Output ButtonsPreset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomOperator Same as administrator but with lower priority AdvancedControl Queue ControlsDetectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAudio Detection PIR SensorEvents EventsSetting Up an Action Rule PTZ ControlRecipients SchedulesRecurrences Axis M1034-W Network Camera Recordings RecordingsRecording List Continuous RecordingAxis M1034-W Network Camera System Options System OptionsSecurity UsersIeee CertiﬁcatesClick Install certiﬁcate and upload the certiﬁcate Date & TimeAudio Support Go to System Options Security CertiﬁcatesBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Https NAT traversal port mapping for IPv4Wireless Wireless Network StatusWireless Settings WPATM-/WPA2TM-PSK WPATM-/WPA-EnterpriseEAP-PEAP/MSCHAPv2 No SecurityQoS Quality of Service CertiﬁcatesUPnPTM can be disabled under System Options Network UPnPTM Smtp emailUPnPTM RTP/H.264Maintenance StoragePorts & Devices Support Support OverviewSystem Overview Logs & ReportsReset to Factory Default Settings ScriptingFile Upload Plain ConﬁgTroubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are ﬂashing red rapidly Video and image problems, generalSetup Video & Audio Camera Settings Problems uploading ﬁlesSettings Motion Detection triggers unexpectedlyNo audio Poor audio qualityTechnical Speciﬁcations Technical SpeciﬁcationsMaintenance Installation aids PowerConnectors Function/group Speciﬁcations NetworkDimensions HxWxD WeightAccessories Terminal connectorPerformance Considerations M2.3