Axis Communications M1034-W Set Up Motion Detection Windows, Motion Detection Parameters

Page 30

AXIS M1034-W Network Camera

Detectors

Note

Using the motion detection feature may decrease the product’s overall performance.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

To delete an include or exclude window, select the window in the list of windows and click Del.

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

High level (100%)

Only very large objects trigger

An object that appears in

Ordinary colored objects on

 

motion detection.

the window triggers motion

ordinary backgrounds trigger

 

 

detection for a long time

motion detection.

 

 

before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Medium level (50%)

 

 

A large difference in luminance

 

 

 

is required to trigger motion

 

 

 

detection.

 

 

 

 

30

Image 30
Contents Axis M1034-W Network Camera Intellectual Property Rights About this documentLiability Equipment ModificationsSafety SupportLearn More Table of Contents Axis M1034-W Network CameraPerformance Considerations Connectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Axis M1034-W Network Camera Access from a Browser Accessing the ProductAccessing the Product Start a browser Internet Explorer, Firefox, SafariSet Power Line Frequency Access from the InternetSet the Root Password Network TCP/IP AdvancedLive View Controls on the Live ViewManual Trigger Go to Setup EventsAxis Media Control viewer toolbar To show the manual trigger buttons in the Live ViewHalf-duplex mode PTZ ControlsMedia Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be usedAccessing Audio Streams Java applet supports simplex audio with G.711 encodingSetting Up the Product Setting Up the ProductBasic Setup Video Stream Video and AudioVideo and Audio Pixel CounterImage Click Save to apply the new settingsStream Profiles 264View Area Camera SettingsExposure Settings Image AppearanceOverlay Image Date/Time Formats in the online help To enable overlaysOverlay Go to Video & Audio Video Stream and select the Image tabAudio Modes Audio SettingsPrivacy Mask Audio InputAudio Clips Audio OutputG711 G726 Default Viewer for Browsers Live View ConfigLive View Config Light Buttons Viewer SettingsUser Defined Links Browser Viewer DescriptionGo to Setup Live View Config Output ButtonsPTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControl Queue Operator Same as administrator but with lower priorityAdvanced ControlsCamera Tampering DetectorsDetectors Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersAudio Detection PIR SensorEvents EventsSetting Up an Action Rule PTZ ControlRecipients SchedulesRecurrences Axis M1034-W Network Camera Recording List RecordingsRecordings Continuous RecordingAxis M1034-W Network Camera Security System OptionsSystem Options UsersIeee CertificatesAudio Support Click Install certificate and upload the certificateDate & Time Go to System Options Security CertificatesBasic TCP/IP Settings NetworkAdvanced TCP/IP Settings Https NAT traversal port mapping for IPv4Wireless Wireless Network StatusWireless Settings WPATM-/WPA2TM-PSK WPATM-/WPA-EnterpriseEAP-PEAP/MSCHAPv2 No SecurityQoS Quality of Service CertificatesUPnPTM UPnPTM can be disabled under System Options Network UPnPTMSmtp email RTP/H.264Maintenance StoragePorts & Devices System Overview SupportSupport Overview Logs & ReportsFile Upload Reset to Factory Default SettingsScripting Plain ConfigEmergency Recovery Procedure TroubleshootingTroubleshooting Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatSetup Video & Audio Camera Settings Status and Network indicator LEDs are flashing red rapidlyVideo and image problems, general Problems uploading filesNo audio SettingsMotion Detection triggers unexpectedly Poor audio qualityTechnical Specifications Technical SpecificationsConnectors Maintenance Installation aidsPower Function/group Specifications NetworkAccessories DimensionsHxWxD Weight Terminal connectorPerformance Considerations M2.3