Axis Communications M1014 user manual Set Up Motion Detection Windows, Motion Detection Parameters

Page 24

AXIS M1014 Network Camera

Detectors

Note

Using the motion detection feature may decrease the product’s overall performance.

Set Up Motion Detection Windows

To set up a motion detection Include Window, follow these instructions:

1.Go to Detectors > Motion Detection.

2.Select the Configure Included Windows option and click New. Select the new window in the list of windows and enter a descriptive name.

3.Adjust the size (drag the bottom right-hand corner) and the position (click on the text at the top and drag to the desired position) of the window.

4.Adjust the Object Size, History and Sensitivity profile sliders (see Motion Detection Parameters for details). Any detected motion within an active window is indicated by red peaks in the Activity window.

5.Click Save.

To exclude parts of the include window, select the Configure Excluded Windows and position the exclude window within the include window.

To delete an include or exclude window, select the window in the list of windows and click Del.

Motion Detection Parameters

The parameters controlling motion detection are described in the table below:

Parameter

Object Size

History

Sensitivity

 

 

 

 

Description

Object size relative to window

Object memory length.

Difference in luminance

 

size.

 

between background and

 

 

 

object.

 

 

 

 

High level (100%)

Only very large objects trigger

An object that appears in

Ordinary colored objects on

 

motion detection.

the window triggers motion

ordinary backgrounds trigger

 

 

detection for a long time

motion detection.

 

 

before it is considered as

 

 

 

non-moving.

 

 

 

 

 

Medium level (50%)

 

 

A large difference in luminance

 

 

 

is required to trigger motion

 

 

 

detection.

 

 

 

 

24

Image 24
Contents Axis M1014 Network Camera Safety About this documentLiability Intellectual Property RightsTable of Contents Axis M1014 Network CameraConnectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Accessing the Product Accessing the ProductAccess from a Browser Access from the Internet Set the Root PasswordSet Power Line Frequency Network TCP/IP AdvancedGo to Setup Events Live ViewControls on the Live View Manual TriggerAxis Media Control viewer toolbar PTZ ControlsHow to Stream H.264 Media StreamsMedia Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1014 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Camera Settings Exposure SettingsView Area Image AppearanceOverlay Overlay ImageGo to Video Video Stream and select the Image tab Go to Video Overlay ImagePrivacy Mask Default Viewer for Browsers Live View ConfigLive View Config Viewer Settings User Defined LinksBrowser Viewer Description Preset Positions Go to PTZ Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced Control QueueControls Detectors DetectorsCamera Tampering Motion DetectionSet Up Motion Detection Windows Motion Detection ParametersDefault values Low level 0%Recommended values Events EventsSetting Up an Action Rule RecipientsGo to Events Action Rules and click Add RecipientSchedules RecurrencesGo to Events Recipients and click Add Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingAxis M1014 Network Camera System Options System OptionsSecurity UsersIeee CertificatesBasic TCP/IP Settings Date & TimeNetwork Go to System Options Security CertificatesAdvanced TCP/IP Settings NTP Configuration Host Name ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4QoS Quality of Service FTPUPnPTM can be disabled under System Options Network UPnPTM Smtp emailUPnPTM RTP/H.264Storage BonjourSD Card Network ShareMaintenance SupportSupport Overview System OverviewReset to Factory Default Settings Logs & ReportsScripting File UploadAxis M1014 Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video and image problems, general Video Camera SettingsProblems uploading files Storage and disk management problemsTechnical Specifications Technical SpecificationsMaintenance Installation aids PowerConnectors DimensionsPerformance Considerations M1.8