Axis Communications M1014 user manual System Options, Security, Users, IP Address Filter

Page 31

AXIS M1014 Network Camera

System Options

System Options

Security

Users

User access control is enabled by default and can be configured under System Options > Security > Users. An administrator can set up other users by giving them user names and passwords. It is also possible to allow anonymous viewer login, which means that anybody may access the Live View page.

The user list displays authorized users and user groups (access levels):

Viewer - Access to the Live View page

Operator - Access to the Live View page and to all settings except System Options

Administrator - Unrestricted access to all settings; can add, modify and remove other users.

Under HTTP/RTSP Password Settings, select the type of password to allow. You may need to allow unencrypted passwords if there are viewing clients that do not support encryption, or if you upgraded the firmware and existing clients support encryption but need to log in again and be configured to use this functionality.

Under User Settings, select the Enable anonymous viewer login option to allow anonymous users access to the Live View page.

Select the Enable anonymous PTZ control login to allow anonymous users access to the PTZ controls.

Deselect the Enable Basic Setup option to hide the Basic Setup menu. Basic Setup provides quick access to settings that should be made before using the Axis product.

ONVIF

ONVIF (Open Network Video Interface Forum) is a global interface standard that makes it easier for end users, integrators, consultants, and manufacturers to take advantage of the possibilities offered by network video technology. ONVIF enables interoperablity between different vendor products, increased flexibility, reduced cost and future-proof systems.

By creating a user you automatically enable ONVIF communication. Use the user name and password with all ONVIF communication with the product. For more information see www.onvif.org

IP Address Filter

IP address filtering is enabled on the System Options > Security > IP Address Filter page. Once enabled, the listed IP address are allowed or denied access to the Axis product. Select Allow or Deny from the list and click Apply to enable IP address filtering.

The administrator can add up to 256 IP address entries to the list (a single entry can contain multiple IP addresses).

HTTPS

The Axis product supports encrypted browsing using HTTPS. This is configured on the System Options > Security > HTTPS page.

Aself-signed certificate can be used until a Certificate Authority-issued certificate has been obtained. Click Create self-signed certificate to install a self-signed certificate. Although self-signed certificates are free and offer some protection, true security is only implemented after the installation of a signed certificate issued by a Certificate Authority.

To obtain a signed certificate from an issuing Certificate Authority, click Create Certificate Request. When the signed certificate is returned, click Install signed certificate to import the certificate. The properties of any certificate request currently resident in the product or installed can be viewed by clicking Properties.

To enable HTTPS in the Axis product, the HTTPS Connection Policy must be set for each user group.

For more information, see the online help.

31

Image 31
Contents Axis M1014 Network Camera Intellectual Property Rights SafetyAbout this document LiabilityAxis M1014 Network Camera Table of ContentsHardware Overview ConnectorsHardware Overview Power connector Mini DC connector LED IndicatorsColor Indication Accessing the Product Accessing the ProductAccess from a Browser Network TCP/IP Advanced Access from the InternetSet the Root Password Set Power Line FrequencyManual Trigger Go to Setup EventsLive View Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis M1014 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Pixel Counter VideoVideo Video StreamImage Stream Profiles264 Image Appearance Camera SettingsExposure Settings View AreaGo to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Live View Config Default Viewer for BrowsersLive View Config User Defined Links Viewer SettingsBrowser Viewer Description PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControl Queue AdvancedControls Motion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsLow level 0% Default valuesRecommended values Events EventsRecipient Setting Up an Action RuleRecipients Go to Events Action Rules and click AddGo to Events Schedules and click Add SchedulesRecurrences Go to Events Recipients and click AddContinuous Recording RecordingsRecordings Recording ListAxis M1014 Network Camera Users System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMNetwork Share StorageBonjour SD CardSystem Overview MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsLogs & Reports ScriptingAxis M1014 Network Camera Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Problems with the H.264 format Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Storage and disk management problems Video and image problems, generalVideo Camera Settings Problems uploading filesTechnical Specifications Technical SpecificationsDimensions Maintenance Installation aidsPower ConnectorsPerformance Considerations M1.8