Axis Communications M1014 NTP Configuration, Host Name Configuration, Link-Local IPv4 Address

Page 35

AXIS M1014 Network Camera

System Options

Select Obtain DNS server address via DHCP to use the DNS settings provided by the DHCP server.

To make manual settings, select Use the following DNS server address and specify the following:

Domain name - Enter the domain(s) to search for the host name used by the Axis product. Multiple domains can be separated by semicolons. The host name is always the first part of a fully qualified domain name, for example, myserver is the host name in the fully qualified domain name myserver.mycompany.com where mycompany.com is the domain name.

Primary/Secondary DNS server - Enter the IP addresses of the primary and secondary DNS servers. The secondary DNS server is optional and will be used if the primary is unavailable.

NTP Configuration

NTP (Network Time Protocol) is used to synchronize the clock times of devices in a network. The NTP settings are configured under System Options > Network > TCP/IP > Advanced.

Select Obtain NTP server address via DHCP to use the NTP settings provided by the DHCP server.

To make manual settings, select Use the following NTP server address and enter the host name or IP address of the NTP server.

Host Name Configuration

The Axis product can be accessed using a host name instead of an IP address. The host name is usually the same as the assigned DNS name. The host name is configured under System Options > Network > TCP/IP > Advanced.

Select Obtain host name via IPv4 DHCP to use host name provided by the DHCP server running on IPv4.

Select Use the host name to set the host name manually.

Select Enable dynamic DNS updates to dynamically update local DNS servers whenever the Axis product’s IP address changes.

For more information, see the online help .

Link-Local IPv4 Address

Link-Local Address is enabled by default and assigns the Axis product an additional IP address which can be used to access the product from other hosts on the same segment on the local network. The product can have a Link-Local IP and a static or DHCP-supplied IP address at the same time.

This function can be disabled under System Options > Network > TCP/IP > Advanced.

HTTP

The HTTP port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 80, any port in the range 1024–65535 can be used.

HTTPS

The HTTPS port used by the Axis product can be changed under System Options > Network > TCP/IP > Advanced. In addition to the default setting, which is 443, any port in the range 1024–65535 can be used.

To enable HTTPS, go to System Options > Security > HTTPS. For more information, see page 31.

NAT traversal (port mapping) for IPv4

A network router allows devices on a private network (LAN) to share a single connection to the Internet. This is done by forwarding network traffic from the private network to the “outside”, that is, the Internet. Security on the private network (LAN) is increased since most routers are pre-configured to stop attempts to access the private network (LAN) from the public network (Internet).

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents Axis M1014 Network Camera Intellectual Property Rights SafetyAbout this document LiabilityAxis M1014 Network Camera Table of ContentsHardware Overview ConnectorsHardware Overview Color Indication LED IndicatorsPower connector Mini DC connector Access from a Browser Accessing the ProductAccessing the Product Network TCP/IP Advanced Access from the InternetSet the Root Password Set Power Line FrequencyManual Trigger Go to Setup EventsLive View Controls on the Live ViewPTZ Controls Axis Media Control viewer toolbarAxis Media Control AMC How to Stream H.264Media Streams Media StreamsAlternative Methods of Accessing the Video Stream Axis M1014 Network Camera Basic Setup Setting Up the ProductSetting Up the Product Pixel Counter VideoVideo Video Stream264 Stream ProfilesImage Image Appearance Camera SettingsExposure Settings View AreaGo to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tabPrivacy Mask Live View Config Default Viewer for BrowsersLive View Config Browser Viewer Description Viewer SettingsUser Defined Links PTZ Pan Tilt Zoom Preset PositionsGo to PTZ Preset Positions PTZ Pan Tilt ZoomControls AdvancedControl Queue Motion Detection DetectorsDetectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsRecommended values Default valuesLow level 0% Events EventsRecipient Setting Up an Action RuleRecipients Go to Events Action Rules and click AddGo to Events Schedules and click Add SchedulesRecurrences Go to Events Recipients and click AddContinuous Recording RecordingsRecordings Recording ListAxis M1014 Network Camera Users System OptionsSystem Options SecurityCertificates IeeeGo to System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkAdvanced TCP/IP Settings NAT traversal port mapping for IPv4 NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressFTP QoS Quality of ServiceRTP/H.264 UPnPTM can be disabled under System Options Network UPnPTMSmtp email UPnPTMNetwork Share StorageBonjour SD CardSystem Overview MaintenanceSupport Support OverviewFile Upload Reset to Factory Default SettingsLogs & Reports ScriptingAxis M1014 Network Camera Checking the Firmware TroubleshootingTroubleshooting Emergency Recovery ProcedureProduct cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Status and Network indicator LEDs are flashing red rapidly Product is accessible locally but not externallyProblems with the H.264 format Storage and disk management problems Video and image problems, generalVideo Camera Settings Problems uploading filesTechnical Specifications Technical SpecificationsDimensions Maintenance Installation aidsPower ConnectorsPerformance Considerations M1.8
Top Page Image Contents