Axis Communications M1014 user manual Date & Time, Network, Basic TCP/IP Settings

Page 33

AXIS M1014 Network Camera

System Options

AServer/Client certificate can be self-signed or issued by a Certificate Authority (CA). A self-signed certificate offers limited protection and can be used before a CA-issued certificate has been obtained.

To install a self-signed certificate:

1.Go to System Options > Security > Certificates.

2.Click Create self-signed certificate and provide the requested information. To create and install a CA-signed certificate:

1.Create a self-signed certificate as described above.

2.Go to System Options > Security > Certificates.

3.Click Create certificate signing request and provide the requested information.

4.Copy the PEM-formatted request and send to the CA of your choice.

5.When the signed certificate is returned, click Install certificate and upload the certificate.

Server/Client certificates can be installed as Certificate from signing request or as Certificate and private key. Select Certificate and private key if the private key is to be upload as a separate file or if the certificate is in PKCS#12 format.

The Axis product is shipped with several preinstalled CA certificates. If required, additional CA certificates can be installed:

1.Go to System Options > Security > Certificates

2.Click Install certificate and upload the certificate.

Date & Time

The Axis product’s date and time settings are configured under System Options > Date & Time.

Current Server Time displays the current date and time (24h clock). The time can be displayed in 12h clock in the text overlay (see below).

To change the date and time settings, select the preferred Time mode under New Server Time:

•Synchronize with computer time sets date and time according to the computer’s clock. With this option, date and time are set once and will not be updated automatically.

•Synchronize with NTP Server obtains date and time from an NTP server. With this option, date and time settings are updated continuously. For information on NTP settings, see NTP Configuration, on page 35.

If using a host name for the NTP server, a DNS server must be configured. See DNS Configuration, on page 34.

•Set manually allows you to manually set date and time.

If using an NTP server, select your Time zone from the drop-down list. If required, check Automatically adjust for daylight saving time changes.

The Date & Time Format Used in Images is the date and time format displayed as a text overlay in the video stream. Use the

predefined formats or see File Naming & Date/Time Formats in the online help for information on how to create custom date and time formats. To include date and time in the overlay text, go to Video and select Include date and Include time.

Network

Basic TCP/IP Settings

The Axis product supports IP version 4 and IP version 6. Both versions can be enabled simultaneously, and at least one version must always be enabled.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Axis M1014 Network Camera About this document SafetyLiability Intellectual Property RightsAxis M1014 Network Camera Table of ContentsConnectors Hardware OverviewHardware Overview LED Indicators Power connector Mini DC connectorColor Indication Accessing the Product Accessing the ProductAccess from a Browser Set the Root Password Access from the InternetSet Power Line Frequency Network TCP/IP AdvancedLive View Go to Setup EventsControls on the Live View Manual TriggerPTZ Controls Axis Media Control viewer toolbarMedia Streams How to Stream H.264Media Streams Axis Media Control AMCAlternative Methods of Accessing the Video Stream Axis M1014 Network Camera Setting Up the Product Setting Up the ProductBasic Setup Video VideoVideo Stream Pixel CounterStream Profiles Image264 Exposure Settings Camera SettingsView Area Image AppearanceOverlay Image OverlayGo to Video Video Stream and select the Image tab Go to Video Overlay ImagePrivacy Mask Default Viewer for Browsers Live View ConfigLive View Config Viewer Settings User Defined LinksBrowser Viewer Description Go to PTZ Preset Positions Preset PositionsPTZ Pan Tilt Zoom PTZ Pan Tilt ZoomAdvanced Control QueueControls Detectors DetectorsCamera Tampering Motion DetectionMotion Detection Parameters Set Up Motion Detection WindowsDefault values Low level 0%Recommended values Events EventsRecipients Setting Up an Action RuleGo to Events Action Rules and click Add RecipientRecurrences SchedulesGo to Events Recipients and click Add Go to Events Schedules and click AddRecordings RecordingsRecording List Continuous RecordingAxis M1014 Network Camera System Options System OptionsSecurity UsersCertificates IeeeDate & Time Basic TCP/IP SettingsNetwork Go to System Options Security CertificatesAdvanced TCP/IP Settings Host Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceSmtp email UPnPTM can be disabled under System Options Network UPnPTMUPnPTM RTP/H.264Bonjour StorageSD Card Network ShareSupport MaintenanceSupport Overview System OverviewLogs & Reports Reset to Factory Default SettingsScripting File UploadAxis M1014 Network Camera Troubleshooting TroubleshootingEmergency Recovery Procedure Checking the FirmwareSymptoms, Possible Causes and Remedial Actions Problems setting the IP addressProduct cannot be accessed from a browser Product is accessible locally but not externally Problems with the H.264 formatStatus and Network indicator LEDs are flashing red rapidly Video Camera Settings Video and image problems, generalProblems uploading files Storage and disk management problemsTechnical Specifications Technical SpecificationsPower Maintenance Installation aidsConnectors DimensionsPerformance Considerations M1.8
Top Page Image Contents