Axis Communications AXIS 216MFD Install the hardware, Mount the camera, Hard ceiling, Screws

Page 5

AXIS 216FD/216FD-V/216MFD/216MFD-V Installation Guide

Page 5

Install the hardware

!IMPORTANT! - The casing of the AXIS 216FD/216FD-V/216MFD/216MFD-V is not approved for outdoor use - the product may only be installed in indoor environments.

Mount the camera

The AXIS 216FD/216FD-V/216MFD/216MFD-V can be mounted with the cables routed through the wall/ceiling, or from above or below. There are cover plates for the openings on both sides of the dome cover. The AXIS 216FD-V/216MFD-V can also be fitted with a metal conduit for protecting the cabling when connected via the side openings. See the illustrations on page 4.

1.Using the drill template, drill two holes in the ceiling/wall.

2.Route and connect all the required cables. See Connect the cables, below.

3.Fasten the camera unit to a ceiling or wall, using screws and plugs appropriate for the ceiling/wall material.

4.Ensure the camera is positioned so that the tamper-proof screws can be tightened using the supplied screwdriver.

Mounting on a hard ceiling

To mount the AXIS 216FD/216FD-V/216MFD/216MFD-V on a hard ceiling, check that the ceiling material is sturdy enough to hold the weight of the camera.

The camera can also be secured using a plate or board that better carries the weight of the camera, and which is more suitable for securing the screws.

Plate or board

Hard ceiling

AXIS 216FD/216FD-V 216MFD/216MFD-V

Screws

ENGLISH

The AXIS 216FD/AXIS 216MFD can also be mounted using the AXIS 216FD/AXIS 216MFD Drop Ceiling Mount, which allows the camera to be mounted more discreetly. Please see www.axis.com for all available mounting accessories.

Image 5
Contents Axis 216FD Axis 216FD-V Axis 216MFD Axis 216MFD-V Page Package contents Installation stepsIndicator LED See DimensionsStatus indicator LED Microphone Hardware overviewMount the camera Install the hardwareMounting on a hard ceiling Hard ceilingConnect the cables Method Recommended for Assign an IP addressAssign the IP address manually optional Axis IP Utility single camera/small installationAutomatic discovery Assign an IP address in a single device Axis Camera Management multiple cameras/large installationsAssign IP addresses in multiple devices Click the OK buttonSet the password Complete the installation Adjust the image and focusPosition Locking screw ScrewAccessing the camera from the Internet Set the IP address with ARP/Ping Other methods of setting the IP addressAuxiliary power and GND Unit connectorsSpecifications FunctionColor Indication Connection diagramLED indicators Further information Resetting to the Factory Default SettingsArticle Modèles/variantes/remarques Étapes de linstallationContenu de lemballage DEL réseau Entrée audio Présentation du matérielTémoin DEL d’état L x P = 94 x 144 x 132mmMontage de la caméra Installation du matérielMontage au plafond dur VisBranchement des câbles Attribution dune adresse IP Méthode Recommandée pour Système DexploitationDéfinissez manuellement ladresse IP optionnel Axis IP Utility Une seule caméra/petite installationDétection automatique Cliquez sur le bouton OK Attribuer une adresse IP à un seul dispositifAttribuer des adresses IP à plusieurs dispositifs Définition du mot de passe Vis de verrouillage Terminer linstallationRéglage de la mise au point Accès à la caméra depuis Internet Définition de ladresse IP à laide dARP/Ping Autres méthodes de définition de ladresse IPRemarques Spécifications Broche Connecteurs de lunitéFonction Couleur Indication Diagramme de connexionTémoins DEL Plus dinformations Rétablissement des paramètres dusine par défautKomponente Modell/Variante/Anmerkung InstallationsschritteLieferumfang Abmessungen HardwareübersichtKamera befestigen Hardware installierenDeckenbefestigung SchraubenKabel anschließen Methode Empfohlen für Betriebssystem IP-Adresse zuweisenManuelle Zuweisung der IP-Adresse optional Axis IP Utility Einzelne Kamera/kleine InstallationAutomatische Erkennung IP-Adressen mehreren Geräten zuweisen Axis Camera Management Mehrere Kameras/große InstallationEine IP-Adresse einem einzelnen Gerät zuweisen Klicken Sie auf OKKennwort festlegen Bildschärfe einstellen Installation abschließenEinstellring zum Bildausgleich Feststellschraube Schärferegler ZoomreglerÜber das Internet auf die Kamera zugreifen IP-Adresse per ARP/Ping zuweisen Andere Methoden zum Festlegen der IP-AdresseHinweise Technische Daten KameraanschlüsseFunktion Farbe Bedeutung AnschlussschaltbildLED-Anzeigen Weitere Informationen Werkseitige Standardeinstellungen wiederherstellenArticolo Modello/varianti/note Procedura di installazioneContenuto della confezione Panoramica dell’hardware DimensioniMontaggio della videocamera Installazione dellhardwareMontaggio a soffitto VitiCollegamento dei cavi Metodo Consigliato per… Impostazione di un indirizzo IPAssegnazione manuale dellindirizzo IP facoltativo Axis IP Utility videocamera singola/piccole installazioniRilevamento automatico Assegnazione di un indirizzo IP in una singola videocamera Axis Camera Management più videocamere/grandi installazioniAssegnazione degli indirizzi IP in più videocamere Fare clic sul pulsante OKImpostazione della password Regolazione della messa a fuoco Completamento dellinstallazioneLinstallazione è completata Accesso a Axis 216FD/216FD-V/216MFD/216MFD-V da Internet Impostazione dellindirizzo IP con ARP/Ping Altri metodi di impostazione dell’indirizzo IPFunzione Numero Specifiche Pin ConnettoriColore Indicazione Schema delle connessioniIndicatori LED Ulteriori informazioni Ripristino delle impostazioni di fabbricaArtículo Modelos/variantes/notas Pasos para la instalaciónContenido del paquete Presentación del hardware DimensionesMontaje de la cámara Instalación del hardwareMontado en un techo sólido TornillosConexión de los cables Método Recomendado para Configuración de una dirección IPAsignación manual de la dirección IP opcional Detección automáticaAsignación de direcciones IP en varios dispositivos Asignación de una dirección IP en un dispositivo individualConfiguración de la contraseña Finalización de la instalación Ajuste del enfoqueDe la imagen Enfoque Tornillo de bloqueoPágina Configuración de la dirección IP con ARP/Ping Otros métodos para configurar la dirección IPNotas Especificaciones ConectoresIndicadores LED Diagrama de conexionesMás información Restablecimiento de los valores iniciales
Related manuals
Manual 74 pages 38.15 Kb