installation
9.After checking the orientation of one touch connector in the upper housing, press the PTZ mechanism into hook in the upper housing.
11.Close the dome cover. Care must be taken to locate dome cover by matching the “Arrow” mark.
ٻ
ٻ
ٻ
ٻ
ٻ
ٻ
G
12.Tighten four screws on the dome cover in sequence as shown in the picture bellow.
10.To lock the PTZ mechanism to the upper housing, press the two black handles till it sounds snap.
ٻ
ٻ
ٻ
1
ٻ
ٻ
ٻ
3
4
2
G
To maintain the best sealing, the torque of each screw must be in the range between 0.5 ~ 1.0 N·m
(0.37 ~ 0.73 lbf·ft).
14 – 36x Network Smart Dome Camera