Samsung SNC-C7478 user manual Operation

Page 19

operation

CHECK POINTS BEFORE

OPERATION

•Before power is applied, please check the cables carefully.

•The camera ID of the controller must be identical to that of the camera to be controlled. The camera ID can be checked in the System Information of OSD Menu.

•If your controller supports multi-protocols, the protocol must be changed to match to that of the camera.

•If you changed camera protocol by changing DIP switch, the change will be effective after you reboot the camera.

•Since the operation method can be different for each controller available, refer to the manual for your controller if camera can not be controlled properly.

PRESET AND PATTERN

FUNCTION PRE-CHECK

•Check how to operate Preset, Scan, Auto Pan and Pattern function with controller or DVR in advance to operate camera function using them. (refer to your System keyboard Manual)

•If controller or DVR has no pattern button or function, use shortcut keys with preset numbers. For more information, refer to “Reserved Preset” in this manual.

AUTO CALIBRATION

•If the camera is continuously subjected to very high temperature (over 50°C or 122°F) environment for a long time, it is possible for the camera to lose focus. As a result, you will get blurry image. In this case, it is recommended to turn on “Auto Calibration” by running Preset 165.

•If you execute AUTO CALIBRATION, camera will calibrate its focus at every 6 hours. To turn off this function, please, run Preset 166.

STARTING OSD MENU

•Function

Using the OSD menu, Preset, Pattern, Auto Pan, Scan and Alarm Input function can be confi gured for each application.

•Enter Menu <Go Preset> [95]

RESERVED PRESET

•Description

Some Preset numbers are reserved to special functions.

•Function

<Go Preset> [95]

: Enters into OSD menu

<Go Preset> [131~134]

: Runs Pattern Function 1~4

<Go Preset> [141~148]

: Runs Auto Pan Function 1~8

<Go Preset> [151~158]

: Runs Scan Function 1~8

<Go Preset> [161~164]

: Sets Relay 1~4 Output to OFF

<Set Preset> [161~164]

: Sets Relay 1~4 Output to ON

<Go Preset> [165]

: Auto Calibration ON.

<Go Preset> [166]

: Auto Calibration OFF.

<Go Preset> [167]

: Zoom Proportional Jog ON

<Set Preset>[167]

: Zoom Proportional Jog OFF

<Go Preset> [170]

: Sets Camera BLC Mode to OFF

<Go Preset> [171]

: Sets Camera BLC Mode to HIGH

<Go Preset> [174]

: Sets Camera Focus Mode to AUTO

<Go Preset> [175]

: Sets Camera Focus Mode to Manual

<Go Preset> [176]

: Sets Camera Focus Mode to SEMI-

 

AUTO

<Go Preset> [177]

: Sets Day & Night Mode to AUTO1

<Go Preset> [178]

: Sets Day & Night Mode to NIGHT

<Go Preset> [179]

: Sets Day & Night Mode to DAY

<Go Preset> [190]

: Sets OSD Display Mode to AUTO

 

(Except Privacy Mask)

<Go Preset> [191]

: Sets OSD Display Mode to OFF

 

(Except Privacy Mask)

<Go Preset> [192]

: Setting OSD Display Mode to ON

 

(Except Privacy Mask)

<Go Preset> [193]

: Sets all Privacy Mask Display to OFF

<Go Preset> [194]

: Sets all Privacy Mask Display to ON

<Go Preset>[200]

: Digital Zoom ON

<Go Preset>[201]

: Digital Zoom OFF

English – 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Please visit our website 36x Network Smart Dome CameraSafety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesCompatible IP Routers Recommended PC SpecificationsLinksys Netgear Wall Mount Type Product & AccessoriesAccessories ProductParts Name & Functions Communication Protocol Setup InstallationDIP Switch Setup Camera ID SetupRS-485 Termination Resistor Installation Using Pole Mount BracketPin 8 RS-485 Termination Resistor ON/OFF Installation 37 ~ 0.73 lbf·ft Cabling Power ConnectionRS-485 Communication Audio Input/Ouput Connection Alarm Input ConnectionPower Video ConnectionInserting an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card Memory Card Information not Included What is a memory card?Selecting a memory card that’s suitable for you Operation Auto PAN Preset PatternSchedule ScanOther Functions Pattern × SET Preset ×××OSD Display of Main Screen General Rules of KEY Operation for MenuMotion Setup How to use osd menuStructure of the Setup Menu Display SetupSystem Setup System Initialize Camera SetupSystem Information Display SetupPrivacy Zone Mask Setup Main MenuPrivacy Zone Area Setup Motion SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupEdit Preset Scene Preset SetupEdit Preset Label Pattern Setup Auto PAN SetupEdit Pattern Scan SetupEdit Scan Set up items such as Action NO., Dwell and OPT Action no NONE/PRESET/AUTO PAN/PATTERNOPT Edit Schedule Schedule SetupWhite Balance Setup Camera SetupAuto Exposure Setup System Setup SET North Direction SET Home PositionLanguage Initial Configuration Table System InitializeXDSL or Cable Modem IP Router Network connection & setupNetwork connection and setup processes are given as follows IP address Subnet Mask Default GatewaySetting the IP address External Remote PC Firewall Ddns Server Data Center, Korea Connecting to the camera from an IP router external PC External Remote PC Ddns Server Data Center, Korea Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingExamples of using Dynamic IP Setting dynamic ipDynamic IP Setting Port Forwarding Port Mapping SettingHttp//e30002c.websamsung.net10000 Login window appears Using the cameraConnecting to the Camera Connecting to the cameraChecking the Ddns address Installing ActivexConnecting to the camera using the IP Installer program For Windows XP Service PackLogging to the camera Main Screen Web viewerUsing the Camera Power PTZIs started To Record a Video At desired scene, click the Record buttonSchedule Using the SD Search Viewer ScreenAlarm Input You can select the desired time to search the alarm eventsSetup Basic Setup toolSetting the Camera Setup Screen LayoutVideo & Audio Configuration IP Address IPv6 EnableIP Type MAC AddressLanguage UserDigital Image Stabilizer DATE/TIME Software UpdateLOG Transfer Setup ResetHttps Record Setup Alarm Input Setup Alarm Image SetupMotion Sensitivity MotionFunction ConfigurationStreaming Protocol Streaming SetupSchedule Transfer Function Transfer IntervalDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix Wall Mount Ceiling Mount AppearanceNtsc PAL Ceiling Mount Bracket DimensionWall Mount Bracket Pipe ThreadRev
Top Page Image Contents