how to use osd menu
Back Space Char.
Space Char.
If you want to use blank, choose Space character (“ ”). If you want to delete a character before, use back space character (“ ”).
eIf you complete the Label editing, move cursor to “OK” and press ENTER key to save completed label. To abort current change, move cursor to “CANCEL” and press ENTER key.
AUTO PAN SETUP
AUTO PAN SETUP |
|
APAN NO. | 1 |
1ST POS. | NOT USED |
2ND POS. | NOT USED |
APAN SPEED | 30/SEC |
CLEAR APAN | CANCEL |
BACK
EXIT
• APAN NO. | [1~8] |
Selects Auto Pan number to edit. If a selected Auto Pan has not defi ned, “NOT USED” is displayed in 1st Position and 2nd Position
• 1ST POS. / 2ND POS. | [PRESET 1~128] |
Set up the 2 position for Auto Pan function. If a selected preset is not defi ned, “UNDEFINED” will be displayed as shown below.
AUTO PAN SETUP |
| ||
APAN NO. | 1 | ||
1ST POS. | PRESET5 | ||
2ND POS. | NOT USED | ||
|
|
| UNDEFINED |
|
|
| |
When Auto Pan function runs, camera moves from the preset assigned as the 1st point to the preset assigned as the 2nd point in CW(Clockwise) direction. Then camera moves from the preset assigned as the 2nd point to the preset assigned as the 1st point in CCW(Counterclockwise) direction. In case that the preset assigned as the 1st point is same as the preset assigned as the 2nd point, camera turns on its axis by 360° in CW direction and then it turns on its axis by 360° in CCW direction.
• APAN SPEED | [1°/sec ~180°/sec] |
Sets Auto Pan speed from 1°/sec to 180°/sec.
• CLEAR APAN | [CANCEL/OK] |
Deletes current Auto Pan data.
PATTERN SETUP
PATTERN SETUP
PATTERN NO. 1 UNDEFINED
CLEAR PATTERN CANCEL <EDIT PATTERN>
BACK
EXIT
• PATTERN NO. | [1~4 ] |
Selects Pattern number to edit.
If a selected pattern number is not defi ned,
“UNDEFINED” will be displayed under selected pattern number.
• CLEAR PATTERN [CANCEL/OK]
Deletes data in current pattern
•EDIT PATTERN Starts editing pattern.
English – 29