operation
•GENERAL/SPECIAL Image Setup
WB (White Balance) and AE (Auto Exposure) can be set up independently for each preset. There are
2 modes, “General” mode & “Special” mode. The General mode means that WB or AE can be set up totally and simultaneously for all presets in “CAMERA SETUP” menu. The Special mode means that WB or AE can be set up independently or separately for each preset in each preset setup menu. Each Special WB/AE value should activate correspondingly when camera arrives at each preset location.
During jog operation, General WB/AE value should be applied. All Special WB/AE value will not be changed although General WB/AE value change.
•ONEAF Focus
This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode by operation. Manual Focus mode activates in preset operation and Auto Focus mode activates during jog operation. With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset. It should shorten time to get focuses.
Focus mode changes to Auto Focus mode automatically when jog operation starts.
OSD DISPLAY OF MAIN SCREEN
Preset Lable 1 |
| LABEL12345 PRESET1 |
| Action Title |
| ||||
|
|
•Action Title
Followings are possible Action Titles and their meaning.
“SET PRESET ×××” | When Preset ××× is stored |
“PRESET ×××” | When camera reach to |
| Preset ××× |
“PATTERN ×” | When Pattern × is in action |
“AUPx/PRESET XXX” | When Auto Pan x is in action |
“UNDEFINED” | When undefi ned function is |
| called to run |
•Preset Label
The Label stored for specifi c Preset.
•Alarm Information
This information shows current state of Alarm Input. The “I” means Input and “O” is output. If an Input is ON state it will show the number of input. If an Input is OFF state,
“O :1” means output 1 is ON
ex) When Point 2 of inputs are ON, and Output 1 is On, OSD will show as below
•Image Flip
Shows that images are currently reversed by
•Date/Time
Displays Current Date and Time.
Date/Time |
|
| 01/MAY/2009 |
|
|
| Alarm Information |
|
| 00:00:01 |
|
|
| ||
Camera ID |
|
|
|
|
| ||
|
| CAM 1 |
|
|
|
| |
|
|
|
|
|
|
|
|
P/T/Z Information
Image Flip
Camera ID
•P/T/Z Information
Current Pan/Tilt angle in degree, zoom magnifi cation and a compass direction.
•Camera ID
Current Camera ID (Address).
GENERAL RULES OF KEY OPERATION FOR MENU
•The menu items surrounded with < > always has its sub menu.
•For all menu level, to go into sub menu, press ENTER key.
•To go to
•To move from items to item in the menu, use joystick in the Up/Down or Left/Right.
•To change a value of an item, use Up/Down of the joystick in the controller.
•Press ENTER key to save values.
22 – 36x Network Smart Dome Camera