Samsung SNC-C7478 user manual Connecting to the camera from an IP router external PC

network connection & setup

Connecting a local PC in the IP router to the camera

1.Run the IP Installer on your local PC and search for the camera.

2.If found, double-click the camera to start the Internet browser and try to connect to the camera. Alternately, launch the Internet browser manually and enter the IP address of the camera found in the address bar to connect to it.

ex) http://192.168.1.2

Connecting to the camera from an IP router external PC

1.An IP router external PC can’t use the IP Installer to search for an IP router internal camera. This is because the IP Installer does not work in a network where the gateway is different.

2.In this case, you can use the DDNS URL of the camera or the Internet IP address of the IP router to connect to the IP router internal camera.

3.However, you must set the port-forwarding for the IP router before you can connect

to the IP router internal camera from a remote PC. For more information on the port-forwarding, refer to “Port Forwarding (Port Mapping) Setting” on page 47.

4.When the port forwarding is done, run the Internet browser on the IP router External

PC and enter the DDNS URL address or, the Internet IP address of the IP router in the address bar for connecting to the camera.

ex) http://e30002c.websamsung.net

• For the DDNS URL address, refer to “Checking the DDNS address” on page 49.

M  A remote PC in an external Internet out of the LAN network may not be able to connect to the camera installed in the intranet if the port-forwarding is not properly set or a firewall is set.

In this case, to resolve the problem, contact your network administrator.

40 – 36x Network Smart Dome Camera