Samsung SNC-C7478 user manual FCC Statement

Page 3

safety information

CAUTION

1.Do not drop objects on the product or apply strong blows to it. Keep away from a location subject to excessive vibration or magnetic interference.

2.Do not install in a location subject to high temperature (over 140°F), low temperature (below -49°F), or high humidity. Doing so may cause ﬁ re or electric shock.

3.If you want to relocate the already installed product, be sure to turn off the power and then move or reinstall it.

4.Remove the power plug from the outlet when there is a lighting storm. Neglecting to do so may cause ﬁ re or damage to the product.

5.Keep out of direct sunlight and heat radiation sources. It may cause ﬁ re.

6.Install it in a place with good ventilation.

7.Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor.

8.Apparatus shall not be exposed to dripping or splashing and no objects ﬁ lled with liquids, such as vases, shall be placed on the apparatus.

9.The Mains plug is used as a disconnect device and shall stay readily operable at any time.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

1)This device may not cause harmful interference, and

2)This device must accept any interference received including interference that may cause undesired operation.

Caution

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a com- mercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

IC Compliance Notice

This Class A digital apparatus meets all requirements of the Canadian Interference.-Causing Equipment Regulations of ICES-003.

English – 3

Image 3

Contents Please visit our website 36x Network Smart Dome CameraSafety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesRecommended PC Specifications Compatible IP RoutersLinksys Netgear Wall Mount Type Product & AccessoriesAccessories ProductParts Name & Functions Communication Protocol Setup InstallationDIP Switch Setup Camera ID SetupInstallation Using Pole Mount Bracket RS-485 Termination ResistorPin 8 RS-485 Termination Resistor ON/OFF Installation 37 ~ 0.73 lbf·ft Power Connection CablingRS-485 Communication Audio Input/Ouput Connection Alarm Input ConnectionPower Video ConnectionINSERTING/REMOVING AN Micro Sdhc Memory Card Inserting an Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Operation Auto PAN Preset PatternScan ScheduleOther Functions Pattern × SET Preset ×××OSD Display of Main Screen General Rules of KEY Operation for MenuMotion Setup How to use osd menuStructure of the Setup Menu Display SetupSystem Setup System Initialize Camera SetupSystem Information Display SetupPrivacy Zone Mask Setup Main MenuMotion Setup Privacy Zone Area SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupPreset Setup Edit Preset SceneEdit Preset Label Pattern Setup Auto PAN SetupScan Setup Edit PatternEdit Scan Action no NONE/PRESET/AUTO PAN/PATTERN Set up items such as Action NO., Dwell and OPTOPT Edit Schedule Schedule SetupCamera Setup White Balance SetupAuto Exposure Setup System Setup SET Home Position SET North DirectionLanguage Initial Conﬁguration Table System InitializeXDSL or Cable Modem IP Router Network connection & setupNetwork connection and setup processes are given as follows IP address Subnet Mask Default GatewaySetting the IP address External Remote PC Firewall Ddns Server Data Center, Korea Connecting to the camera from an IP router external PC External Remote PC Ddns Server Data Center, Korea Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingExamples of using Dynamic IP Setting dynamic ipDynamic IP Setting Port Forwarding Port Mapping SettingHttp//e30002c.websamsung.net10000 Login window appears Using the cameraConnecting to the Camera Connecting to the cameraChecking the Ddns address Installing ActivexConnecting to the camera using the IP Installer program For Windows XP Service PackLogging to the camera Main Screen Web viewerUsing the Camera Power PTZIs started To Record a Video At desired scene, click the Record buttonSchedule Using the SD Search Viewer ScreenAlarm Input You can select the desired time to search the alarm eventsSetup Basic Setup toolSetting the Camera Setup Screen LayoutVideo & Audio Configuration IP Address IPv6 EnableIP Type MAC AddressUser LanguageDigital Image Stabilizer Software Update DATE/TIMELOG Reset Transfer SetupHttps Record Setup Alarm Input Setup Alarm Image SetupMotion Sensitivity MotionFunction ConﬁgurationStreaming Protocol Streaming SetupSchedule Transfer Function Transfer IntervalDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix Wall Mount Ceiling Mount AppearanceNtsc PAL Ceiling Mount Bracket DimensionWall Mount Bracket Pipe ThreadRev