Samsung SNC-C7478 user manual Network connection & setup, XDSL or Cable Modem IP Router, Local PC

Page 37

network connection & setup

You can set up the network settings according to your network confi gurations.

❖Network connection and setup processes are given as follows.

• Connect the camera to an IP router with a xDSL/Cable modem. (Page 37~38)

• Connect the camera to an IP router with local area networking. (Page 39~40)

• Connect the camera directly to a DHCP-based xDSL/Cable modem. (Page 41)

• Connect the camera directly to local area networking. (Page 42)

M Compliant IP routers are as listed below.

-Linksys

-D-Link

-Netgear

Using non-recommended IP router may cause the network connection error.

Depending on the performance of the PC (Viewer installed) or the network, the video transmission can be delayed or even disconnected.

For soft video transmission, you can set the bandwidth in <NETWORK> → <STREAMING SETUP> in the setup menu.

J The IP and MAC addresses used in this manual are for illustrative purposes only.

Therefore, you must refer to Notice the network settings of your PC and do not enter the addresses presented in this manual.

CONNECTING THE CAMERA TO AN IP ROUTER WITH THE XDSL/ CABLE MODEM

SNC-C7478

SNC-C7478

xDSL or Cable Modem

IP Router

xDSL or Cable Modem External Remote PC

Local PC

DDNS Server

(Data Center, KOREA)

 

Configuring the network settings of the local PC connected to an IP router

Confi guring the network settings of the local PC connected to an IP router, follow the instructions below.

•Select : <Network Neighborhood> → <Properties> → <Local Area Connection> → <Properties> →

<General> → <Internet Protocol (TCP/IP)> → <Properties> → <Obtain an IP address automatically> or <Use the following IP address>

•Follow the instructions below if you select <Use the following IP address>: ex1) If the address (LAN IP) of the IP router is 192.168.1.1

IP address: 192.168.1.100

Subnet Mask: 255.255.255.0

Default Gateway: 192.168.1.1

English – 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Please visit our website 36x Network Smart Dome CameraSafety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesCompatible IP Routers Recommended PC SpecificationsLinksys Netgear Accessories Product & AccessoriesProduct Wall Mount TypeParts Name & Functions DIP Switch Setup InstallationCamera ID Setup Communication Protocol SetupRS-485 Termination Resistor Installation Using Pole Mount BracketPin 8 RS-485 Termination Resistor ON/OFF Installation 37 ~ 0.73 lbf·ft Cabling Power ConnectionRS-485 Communication Power Alarm Input ConnectionVideo Connection Audio Input/Ouput ConnectionInserting an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card Memory Card Information not Included What is a memory card?Selecting a memory card that’s suitable for you Operation Auto PAN Preset PatternSchedule ScanOther Functions OSD Display of Main Screen SET Preset ×××General Rules of KEY Operation for Menu Pattern ×Structure of the Setup Menu How to use osd menuDisplay Setup Motion SetupSystem Setup System Initialize Camera SetupPrivacy Zone Mask Setup Display SetupMain Menu System InformationPrivacy Zone Area Setup Motion SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupEdit Preset Scene Preset SetupEdit Preset Label Pattern Setup Auto PAN SetupEdit Pattern Scan SetupEdit Scan Set up items such as Action NO., Dwell and OPT Action no NONE/PRESET/AUTO PAN/PATTERNOPT Edit Schedule Schedule SetupWhite Balance Setup Camera SetupAuto Exposure Setup System Setup SET North Direction SET Home PositionLanguage Initial Configuration Table System InitializeNetwork connection and setup processes are given as follows Network connection & setupIP address Subnet Mask Default Gateway XDSL or Cable Modem IP RouterSetting the IP address External Remote PC Firewall Ddns Server Data Center, Korea Connecting to the camera from an IP router external PC External Remote PC Ddns Server Data Center, Korea Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingDynamic IP Setting Setting dynamic ipPort Forwarding Port Mapping Setting Examples of using Dynamic IPConnecting to the Camera Using the cameraConnecting to the camera Http//e30002c.websamsung.net10000 Login window appearsConnecting to the camera using the IP Installer program Installing ActivexFor Windows XP Service Pack Checking the Ddns addressLogging to the camera Main Screen Web viewerUsing the Camera Power PTZIs started To Record a Video At desired scene, click the Record buttonAlarm Input Using the SD Search Viewer ScreenYou can select the desired time to search the alarm events ScheduleSetting the Camera Setup toolSetup Screen Layout Setup BasicVideo & Audio Configuration IP Type IPv6 EnableMAC Address IP AddressLanguage UserDigital Image Stabilizer DATE/TIME Software UpdateLOG Transfer Setup ResetHttps Record Setup Alarm Input Setup Alarm Image SetupFunction MotionConfiguration Motion SensitivitySchedule Transfer Function Streaming SetupTransfer Interval Streaming ProtocolDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix Wall Mount Ceiling Mount AppearanceNtsc PAL Wall Mount Bracket DimensionPipe Thread Ceiling Mount BracketRev
Top Page Image Contents