Samsung SNC-C7478 user manual Camera Setup, White Balance Setup, Auto Exposure Setup

Page 33

how to use osd menu

CAMERA SETUP

Setup the general functions of zoom camera module

ZOOM CAMERA SETUP

FOCUS MODE	ONEAF
DIGITAL ZOOM	ON
IMAGE FLIP	OFF
FLICKERLESS	OFF

<WHITE BALANCE SETUP> <AUTO EXPOSURE SETUP>

BACK

EXIT

•FOCUS MODE [AUTO/MANUAL/ONEAF] Sets camera focus mode.

ONEAF

This mode exchanges focus mode automatically between Manual Focus mode and Auto Focus mode. Manual Focus mode activates in preset operation and Auto Focus mode activates when jog operation starts.

With Manual mode at presets, Focus data is memorized in each preset in advance and camera calls focus data in correspondence with presets as soon as camera arrives at a preset.

•DIGITAL ZOOM [ON/OFF]

Sets digital zoom function to ON/OFF. If this is set to OFF, optical zoom function runs but zoom function stops at the end of optical zoom magniﬁ cation.

• IMAGE FLIP

[ON/OFF]

To display Upside down image.

•FLICKERLESS [ON/OFF]

This is for preventing a ﬂ ickering screen that is caused by a mismatch between the vertical sync frequency and the ﬂ icker frequency of the lighting; if set to ON, the AE mode will switch to Shutter mode and the shutter speed will be ﬁ xed at 1/100 second.

❖ White Balance Setup

WB SETUP
WB MODE	AUTO
- RED ADJUST	---
- BLUE ADJUST	---

BACK

EXIT

• WB MODE

[AUTO/MANUAL]

In Manual mode, Red and Blue level can be set up manually

• RED ADJUST [0~255]

• BLUE ADJUST [0~255]

❖Auto Exposure Setup

AE SETUP
WDR/BLC	ALL OFF
DAY/NIGHT	AUTO	1
AE MODE	AUTO

IRIS LEVEL ---

GAIN LEVEL ---

SHUTTER SPD AUTOX16

BRIGHTNESS ---

BACK

EXIT

• WDR/BLC

[ ALL OFF / WDR ON / BLC ON ]

Select WDR(Wide Dynamic Range) or BLC(Backlight Compensation) function. All OFF means turning off both functions.

• DAY/NIGHT

[AUTO 1/AUTO 2/DAY/NIGHT]

The illumination condition for switching between Day and Night modes of AUTO1 is brighter than that of AUTO2.

• AE MODE	[AUTO / MANUAL / IRIS / SHUTTER
	/ BRIGHT]

AUTO: Full Auto mode for AE function

MANUAL: In manual mode. Iris, Gain, Shutter Speed can be changed in this mode.

IRIS: Iris priority mode. You can change Iris while others are adjusted automatically.

SHUTTER: Shutter priority mode. Shutter speed can be changed while others are adjusted automatically.

BRIGHTNESS: In this mode, you can assign AE value in terms of Brightness.

English – 33

Image 33

Contents Please visit our website 36x Network Smart Dome CameraSafety information FCC Statement Important safety instructions Contents Contents Introduction FeaturesRecommended PC Specifications Compatible IP RoutersLinksys Netgear Accessories Product & AccessoriesProduct Wall Mount TypeParts Name & Functions DIP Switch Setup InstallationCamera ID Setup Communication Protocol SetupInstallation Using Pole Mount Bracket RS-485 Termination ResistorPin 8 RS-485 Termination Resistor ON/OFF Installation 37 ~ 0.73 lbf·ft Power Connection CablingRS-485 Communication Power Alarm Input ConnectionVideo Connection Audio Input/Ouput ConnectionINSERTING/REMOVING AN Micro Sdhc Memory Card Inserting an Micro Sdhc Memory CardRemoving an Micro Sdhc Memory Card What is a memory card? Memory Card Information not IncludedSelecting a memory card that’s suitable for you Operation Auto PAN Preset PatternScan ScheduleOther Functions OSD Display of Main Screen SET Preset ×××General Rules of KEY Operation for Menu Pattern ×Structure of the Setup Menu How to use osd menuDisplay Setup Motion SetupSystem Setup System Initialize Camera SetupPrivacy Zone Mask Setup Display SetupMain Menu System InformationMotion Setup Privacy Zone Area SetupPrivacy Zone Size Adjustment Parking Action Setup Function SetupPreset Setup Edit Preset SceneEdit Preset Label Pattern Setup Auto PAN SetupScan Setup Edit PatternEdit Scan Action no NONE/PRESET/AUTO PAN/PATTERN Set up items such as Action NO., Dwell and OPTOPT Edit Schedule Schedule SetupCamera Setup White Balance SetupAuto Exposure Setup System Setup SET Home Position SET North DirectionLanguage Initial Conﬁguration Table System InitializeNetwork connection and setup processes are given as follows Network connection & setupIP address Subnet Mask Default Gateway XDSL or Cable Modem IP RouterSetting the IP address External Remote PC Firewall Ddns Server Data Center, Korea Connecting to the camera from an IP router external PC External Remote PC Ddns Server Data Center, Korea Connecting to the camera from a local PC in the LAN Connecting the Camera Directly to Local Area NetworkingSearching for the Camera IP Installer screen layoutManual Network Setting Setting static ipDevice Port a port used to control video transmission. If more than one camera are connected to an IP RouterEnter your password Automatic Network SettingDynamic IP Setting Setting dynamic ipPort Forwarding Port Mapping Setting Examples of using Dynamic IPConnecting to the Camera Using the cameraConnecting to the camera Http//e30002c.websamsung.net10000 Login window appearsConnecting to the camera using the IP Installer program Installing ActivexFor Windows XP Service Pack Checking the Ddns addressLogging to the camera Main Screen Web viewerUsing the Camera Power PTZIs started To Record a Video At desired scene, click the Record buttonAlarm Input Using the SD Search Viewer ScreenYou can select the desired time to search the alarm events ScheduleSetting the Camera Setup toolSetup Screen Layout Setup BasicVideo & Audio Configuration IP Type IPv6 EnableMAC Address IP AddressUser LanguageDigital Image Stabilizer Software Update DATE/TIMELOG Reset Transfer SetupHttps Record Setup Alarm Input Setup Alarm Image SetupFunction MotionConﬁguration Motion SensitivitySchedule Transfer Function Streaming SetupTransfer Interval Streaming ProtocolDdns Snmp Snmp User SetupProblem Solution TroubleshootingAppendix Wall Mount Ceiling Mount AppearanceNtsc PAL Wall Mount Bracket DimensionPipe Thread Ceiling Mount BracketRev