setup tool
❖RTP Port Range
•Set up the range of port number to use for RTP Protocol.
The Start number of RTP Port has to be even number and the last number must be greater than the start number +4. I.e. the difference should be at least 4.
❖RTP Multicast Address
•Set up IP Address for RTP/UDP Multicast.
❖RTP Multicast Port
•Set up Port number used in RTP/UDP Multicast. It is noted that RTP Multicast Port must be a even number.
❖RTP Multicast TTL
•Set up TTL for RTP/UDP Multicast. TTL is a number between 0 ~ 255.
USER
❖Login Authentication
•You can determine whether to require login authentication for users.
If it is set to <Enable>, the users can connect to the system through login authentication, while it is set to <Disable>, the users can connect to the system without login authentication. However, users connected to the system without login have USER permission.
When the setting is complete, click the [Apply] button.
❖User Login ID/Password List
•Shows user ID, password and level (permissions) in a list.
You can register up to 10 users. The default administrator ID is “root”.
<Administrator> cannot be deleted or added and you can change the password only.
M For the ID and password, up to 9 alphanumeric and some special characters are allowed.
You cannot register a duplicated user ID.
You cannot register root or guest user ID.
ÚAbout User Level
Administrator | The Administrator can use all functions and |
| change the PTZ control, setup or search. |
|
|
Operator | The Operator can use all function except |
| setup and search functions. |
|
|
User | The User can monitor video only. |
|
|
LANGUAGE
You can select onc from 7 languages (English/Korean/ Chinese/French/Italian/Spanish/German).
DIGITAL IMAGE STABILIZER
❖DIS Function
•DIS (Digital Image Stabilizer) is a function to compensate the shaken image. Owing to DIS function, clear image can be obtained regardless of vibration or shaking from the environment. Especially, this function can be powerful when camera is mounted on long pole, in the bridge, beside freeways, or in the windy region.
DIS Function is not effective to analog video form BNC Video Out but only effective in the digital video though IP networks.
(i.e. Web viewer or NVR)
❖DIS Setup
•Select one from Weak, Medium, and Strong. If you select Strong, you can obtain a sharper, but higher vibrating or shaky image comparing to Weak, and Medium.
58 – 36x Network Smart Dome Camera