Samsung SNC-C7478 user manual Alarm Image Setup, Alarm Input Setup

Page 62

setup tool

❖Options

•Determine whether or not you wish to receive Email notifi cation of insuffi cient capacity warnings.

ALARM IMAGE SETUP

can send a prior image of up to 30 seconds after an alarm is generated. (The maximum time is determined by the number of images to be sent per second.)

<Post-Alarm Duration>: Determines time of posterior images to be sent. You can select one from <5 sec>, <10 sec>, <15 sec> and <30 sec>. You can send a posterior image of up to 30 seconds after an alarm is generated. (The maximum time is determined by the number of images to be sent per second.)

ALARM INPUT SETUP

Various functions of 8 Alarm Inputs can be set up independently.

❖Transfer Mode

You can select a method to send an alarm image from the <FTP Transfer>, <E-Mail Transfer> and <SD Card Record>.

<FTP Transfer>: The image is sent to the specifi ed FTP address.

<E-Mail Transfer>: The image is sent to the specifi ed Email address.

<SD Card Record>

►Insert an Micro SDHC memory card.

►Confi gure the Micro SDHC memory card (refer to page 17 for details).

►Check the SD Card Recording option and then click on the [Apply] button. The SD indicator will then turn on and recording will commence.

►To remove the Micro SDHC memory card, fi rst uncheck the SD Card Recording option and then click on the [Apply] button.

M Removing the Micro SDHC memory card while recording is in progress can damage the data.

❖Transferred Image Naming Setup

•You can set the fi le name of an alarm image to be sent when an alarm is generated or during the scheduled transfer.

❖Pre/Post Alarm Image

•You can determine which of previous or posterior image is to be sent.

<Number of Image>: Determines number of images to be sent per second. You can select 1, 2, 3 and 5 images per second.

<Pre-Alarm Duration>: Determines time of prior images to be sent. You can select one from <5 sec>, <10 sec>, <15 sec> and <30 sec>. You

❖Input Device Setup

•Select an input type from the <Off>, <NO> and <NC>.

<NO>(Normal Open): It is normally open, but if it is close, an alarm will be generated.

<NC>(Normal Close): It is normally close, but if it is open, an alarm will be generated.

❖Activation Time

•You can set time to accept an alarm to take an action.

<Always>: Always conducts the <Action> setting when an alarm is generated.

<Only Scheduled Time>: Conducts the <Action> setting for an alarm only when it occurs during the specifi ed time period on the specifi ed day of the week. The Start Time must prior to and must differ from the End Time.

❖Action

•You can set an operation to be conducted when an alarm is generated.

<Alarm Output>: Determines alarm output port to which the alarm signal is to be sent.

<Output Duration>: Determines the period of time to output alarm signal to the specifi ed alarm output port when an alarm is generated. If another alarm

62 – 36x Network Smart Dome Camera

Page 61 Page 63
Image 62
Page 61 Page 63
Contents 36x Network Smart Dome Camera Please visit our websiteSafety information FCC Statement Important safety instructions Contents Contents Features IntroductionLinksys Netgear Recommended PC SpecificationsCompatible IP Routers Product Product & AccessoriesAccessories Wall Mount TypeParts Name & Functions Camera ID Setup InstallationDIP Switch Setup Communication Protocol SetupPin 8 RS-485 Termination Resistor ON/OFF Installation Using Pole Mount BracketRS-485 Termination Resistor Installation 37 ~ 0.73 lbf·ft RS-485 Communication Power ConnectionCabling Video Connection Alarm Input ConnectionPower Audio Input/Ouput ConnectionRemoving an Micro Sdhc Memory Card INSERTING/REMOVING AN Micro Sdhc Memory CardInserting an Micro Sdhc Memory Card Selecting a memory card that’s suitable for you What is a memory card?Memory Card Information not Included Operation Preset Pattern Auto PANOther Functions ScanSchedule General Rules of KEY Operation for Menu SET Preset ×××OSD Display of Main Screen Pattern ×Display Setup How to use osd menuStructure of the Setup Menu Motion SetupCamera Setup System Setup System InitializeMain Menu Display SetupPrivacy Zone Mask Setup System InformationPrivacy Zone Size Adjustment Motion SetupPrivacy Zone Area Setup Function Setup Parking Action SetupEdit Preset Label Preset SetupEdit Preset Scene Auto PAN Setup Pattern SetupEdit Scan Scan SetupEdit Pattern OPT Action no NONE/PRESET/AUTO PAN/PATTERNSet up items such as Action NO., Dwell and OPT Schedule Setup Edit ScheduleAuto Exposure Setup Camera SetupWhite Balance Setup System Setup Language SET Home PositionSET North Direction System Initialize Initial Configuration TableIP address Subnet Mask Default Gateway Network connection & setupNetwork connection and setup processes are given as follows XDSL or Cable Modem IP RouterSetting the IP address External Remote PC Firewall Ddns Server Data Center, Korea Connecting to the camera from an IP router external PC External Remote PC Ddns Server Data Center, Korea Connecting the Camera Directly to Local Area Networking Connecting to the camera from a local PC in the LANIP Installer screen layout Searching for the CameraSetting static ip Manual Network SettingIf more than one camera are connected to an IP Router Device Port a port used to control video transmission.Automatic Network Setting Enter your passwordPort Forwarding Port Mapping Setting Setting dynamic ipDynamic IP Setting Examples of using Dynamic IPConnecting to the camera Using the cameraConnecting to the Camera Http//e30002c.websamsung.net10000 Login window appearsFor Windows XP Service Pack Installing ActivexConnecting to the camera using the IP Installer program Checking the Ddns addressLogging to the camera Web viewer Main ScreenPower PTZ Using the CameraTo Record a Video At desired scene, click the Record button Is startedYou can select the desired time to search the alarm events Using the SD Search Viewer ScreenAlarm Input ScheduleSetup Screen Layout Setup toolSetting the Camera Setup BasicVideo & Audio Configuration MAC Address IPv6 EnableIP Type IP AddressDigital Image Stabilizer UserLanguage LOG Software UpdateDATE/TIME Https ResetTransfer Setup Record Setup Alarm Image Setup Alarm Input SetupConfiguration MotionFunction Motion SensitivityTransfer Interval Streaming SetupSchedule Transfer Function Streaming ProtocolDdns Snmp User Setup SnmpTroubleshooting Problem SolutionAppendix Appearance Wall Mount Ceiling MountNtsc PAL Pipe Thread DimensionWall Mount Bracket Ceiling Mount BracketRev
Top Page Image Contents