Cisco Systems CIVIS-IPC-2611 manual Firmware Window, Option

Page 39

Chapter 3 Configuring and Managing the IP Camera

Administration Windows

Table 3-7 Maintenance Window Options (continued)

Option

Upload

Description

Path and folder where a configuration file is stored. You can click Browse to find this location. After you enter this information, click Upload and follow the on-screen prompts to load the configuration file to the IP camera.

After you upload a configuration file to the IP camera, the IP camera restarts automatically.

If you upload configuration from another IP camera that is active in your network, make sure to configure this IP camera with a name, description, and unique IP address (if not obtained from DHCP). To change these options, see the “Basic Setup Window” section on page 3-5.

Note A configuration file that you upload includes the passwords that are configured for the administrator and for users. If you change any passwords after saving the configuration file, be aware that uploading the file overwrites the new passwords with the saved ones.

Firmware Window

The Firmware window lets you view information about the firmware that is installed on the IP camera and upgrade the firmware.

Before you upgrade firmware, download the firmware file to a PC that is accessible on your network and unzip the file if it is zipped. To download firmware, go to this web page:

http://www.cisco.com/en/US/products/ps7307/index.html

After you upgrade firmware, the IP camera restarts automatically. It retains all configuration information.

To display the Firmware window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-8, click Administration, then click Firmware.

Table 3-8describes the options in the Firmware window.

Table 3-8 Firmware Window Options

Option

Description

 

 

Firmware Version

Display only. Firmware version that is loaded on the IP camera.

 

 

Upgrade

Click the Upgrade button to upgrade the firmware on the IP camera.

 

When you click this button, the Upgrade Firmware window appears. In this

 

window, enter the path and folder where the firmware upgrade file for the IP

 

camera is stored. The upgrade file may be stored on another PC. You can

 

click Browse to find this location. After you enter this information, click

 

Upgrade and follow the on-screen prompts to load the firmware upgrade on

 

the IP camera.

 

Note Do not power down the IP camera during the upgrade procedure.

 

 

Recovery Firmware

Display only. Firmware version of the recovery image. If an upgrade fails,

Version

the IP camera boots from the recovery image.

 

 

 

 

Cisco Video Surveillance 2611 IP Dome User Guide

 

 

 

 

 

 

OL-24128-02

 

 

3-15

 

 

 

 

 

Page 38 Page 40
Image 39
Page 38 Page 40
Contents Americas Headquarters Cisco Video Surveillance 2611 IP Dome User GuideCisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features, IP Camera Overview, FeaturesIP Camera Overview Physical Details, Package Contents,Top of the 2611 IP Dome Physical DetailsOverview IP Camera Overview Bottom of the 2611 IP Dome Described in the Resetting the IP Camera section onPackage Contents Before Your Begin Getting StartedPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2611 IP DomePassing the Audio Cable through a Ferrite Core Preparing for InstallationRecessed Mounting in a Ceiling Tile ProcedurePlacing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Protocol//ipaddress Accessing the IP Camera WindowsHttp//203.70.212.521024 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52Adjusting the Video Image Adjusting the Camera Lens on the 2611 IP Dome Powering the IP Camera On or OffInitial Setup of the IP Camera Resetting the IP CameraCleaning the IP Camera Reset Type Procedure RemarksConfiguration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Focus/Zoom Window See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSnmp Navigating the Configuration WindowsOption Description Setup WindowsBasic Setup Window Device SettingsOption Description Network Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsSettings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Audio Window Controls section onDuplex Talk and Listen Full Duplex Talk and Listen Privacy Region WindowFocus/Zoom Window Choose Simplex Talk Only , Half Duplex Talk or Listen , orSecurity Windows Initialization WindowInitialization Window, Complexity Window, Users Window section on Complexity WindowMail/FTP/HTTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerHttp Notification Mail BodyPrimary FTP Secondary FTPSystem-provided-name-value-pairs is the event information Motion Detection WindowEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Mail/FTP/HTTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsStatus Windows System WindowSystem Status Audio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogLog List Message ExplanationSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24128-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsAccessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing Dual Streams H.264 + Mjpeg Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8
Top Page Image Contents