Cisco Systems CIVIS-IPC-2611 manual Status Windows, System Window, System Status

Page 60

Chapter 3 Configuring and Managing the IP Camera

Status Windows

Status Windows

The Status windows provide options for viewing and managing a variety of system information. The following sections describe the Status windows in detail:

•System Window, page 3-36

•Audio/Video Window, page 3-37

•Network Window, page 3-38

•Syslog & Log Window, page 3-38

•Video Log Window, page 3-44

System Window

The System window displays information about the IP camera.

To display the System window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-8, click Status, then click System.

To make sure that the System window shows the most current information, click the Refresh button. Table 3-20describes the options in the System window. All options are for display only.

Table 3-20	System Window Options

Option		Description

System Status

Firmware Version		Version of the firmware that is installed on the IP camera.

Hardware Version		Not used.

Sensor Firmware		Version of the sensor firmware that is installed by the factory on the IP
Version		camera.

MAC Address		MAC address of the IP camera.

Camera Name		Name of the IP camera, as configured in the Basic Setup window. For more
		information, see the “Basic Setup Window” section on page 3-5.

Description		Description of the IP camera, as configured in the Basic Setup window. For
		more information, see the “Basic Setup Window” section on page 3-5.

Date/Time		Current date and time of the IP camera. To set the date and time, see the
		“Basic Setup Window” section on page 3-5.

UDI
Note The Unique Device Identifier (UDI) provides information about Cisco devices.

Product Identifier		Cisco product ID of the IP camera.

Version Identifier		Not used.

Serial Number		Serial number of the IP camera.

Entity Name		Cisco top level assembly part number of the IP camera.

Product Description		Revision of the Cisco top level assembly part number.

	Cisco Video Surveillance 2611 IP Dome User Guide
3-36	OL-24128-02

Image 60

Contents Cisco Video Surveillance 2611 IP Dome User Guide Americas HeadquartersCisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2611 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2611 IP DomePackage Contents Getting Started Before Your BeginInstalling the Cisco Video Surveillance 2611 IP Dome Preventing Electrostatic Discharge DamagePreparing for Installation Passing the Audio Cable through a Ferrite CoreProcedure Recessed Mounting in a Ceiling TilePlacing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Accessing the IP Camera Windows Protocol//ipaddressHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Adjusting the Video Image Powering the IP Camera On or Off Adjusting the Camera Lens on the 2611 IP DomeResetting the IP Camera Cleaning the IP CameraReset Type Procedure Remarks Initial Setup of the IP CameraConfiguring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Alarm I/O Ports See the Audio Window sectionSee the Privacy Region See the Focus/Zoom WindowNavigating the Configuration Windows SnmpSetup Windows Basic Setup WindowDevice Settings Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Audio Window Controls section onDuplex Talk and Listen Privacy Region Window Focus/Zoom WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenSecurity Windows Initialization WindowInitialization Window, Complexity Window, Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMail Body Primary FTPSecondary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Event Schedule New ScheduleClear button Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsStatus Windows System WindowSystem Status Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerLog List Message ExplanationSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24128-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionDigital zoom controls Audio controlsSnapshot controls SaveIP camera controls For related information, see the Video Window section onAccessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8