Cisco Systems CIVIS-IPC-2611 manual Address1 Port1 Address2 Port2 , User, FTP log messages

Page 67

Chapter 3 Configuring and Managing the IP Camera

Status Windows

	Table 3-24	Syslog and Log Information (continued)

	Message		Explanation

	Stream: RTSP stream started. [ip: Type, UDP:		Provides information when an RTSP stream from
	Address_1:Port_1 ->Address_2:Port_2, User]		the IP camera is initiated (RTSP stream started) or
			stopped (RTSP stream stopped).
	Stream: RTSP stream stopped. [ip: Type, UDP:		stopped (RTSP stream stopped).
	Stream: RTSP stream stopped. [ip: Type, UDP:
	Address_1:Port_1 ->Address_2:Port_2, User]		Type is the type of stream (Video or Audio).
			Address_1:Port_1 are the IP address and port
			number of the IP camera. Address_2:Port_2 are IP
			address and port number of the device that
			receives the stream. User is the IP camera user
			name of the user who started or stopped the
			stream.

	successful admin user login.		A user with administrator privileges logged in to
			the IP camera.

	successful view only user login.		A user with viewer privileges or monitor
			privileges logged in to the IP camera.

	System: Cancel upgrade process		An IP camera administrator cancelled a firmware
			upgrade that was in process.

	System: Invalid upgrade file		You are attempting to upgrade firmware for the IP
			camera but are using and invalid firmware file.

	System: Reset to factory defaults.		Factory reset procedure performed for the IP
			camera.

	Unsuccessful login attempt.		A user tried but was unable to log in to the IP
			camera.

	Web: Invalid login attempt. [id: User_ID, ip:		Provides information when someone logs in, or
	Address]		attempts to log in, to the IP camera.

	Web: User logged in to web UI. [id: User_ID, ip: User is the IP camera user name of the user.
	Address]		Address is the IP address of the PC that was used.

Web: User logged out from web UI. [id: User_ID,

ip: Address]

FTP log messages.

Note These messages appear if you enable the FTP Log option.

FTP: Error during the connection or timeout.

[host: Address]

FTP: File uploading failed. [host: Address]

FTP: File uploaded successfully. [host: Address]

FTP: Login failed. [host: Address]

FTP: No such remote path. [host: Address]

FTP: Unknown FTP server. [host: Address]

Provide information when the camera uploads a video file to the FTP server.

Address is the IP address of the FTP server.

		Cisco Video Surveillance 2611 IP Dome User Guide
		Cisco Video Surveillance 2611 IP Dome User Guide
	OL-24128-02			3-43
	OL-24128-02			3-43

Image 67

Contents Americas Headquarters Cisco Video Surveillance 2611 IP Dome User GuideCisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features, IP Camera Overview, FeaturesIP Camera Overview Physical Details, Package Contents,Top of the 2611 IP Dome Physical DetailsOverview IP Camera Overview Bottom of the 2611 IP Dome Described in the Resetting the IP Camera section onPackage Contents Before Your Begin Getting StartedPreventing Electrostatic Discharge Damage Installing the Cisco Video Surveillance 2611 IP DomePassing the Audio Cable through a Ferrite Core Preparing for InstallationRecessed Mounting in a Ceiling Tile ProcedurePlacing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Protocol//ipaddress Accessing the IP Camera WindowsHttp//203.70.212.521024 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.52Adjusting the Video Image Adjusting the Camera Lens on the 2611 IP Dome Powering the IP Camera On or OffInitial Setup of the IP Camera Resetting the IP CameraCleaning the IP Camera Reset Type Procedure RemarksConfiguration Overview Configuring and Managing the IP CameraConfiguration Item Explanation Guidelines for Use Reference See the Focus/Zoom Window See the Alarm I/O PortsSee the Audio Window section See the Privacy RegionSnmp Navigating the Configuration WindowsOption Description Setup WindowsBasic Setup Window Device SettingsOption Description Network Settings Advanced Setup WindowBonjour OptionOption Description QoS IP Filter WindowEAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window User List AdministratorMaintenance Window Firmware Window Video Window Audio/Video WindowsSettings Dual Streams MPEG-4 + Mjpeg -Configures MPEG-4 forMPEG-4 Settings Resolution Choose the resolution of the Mjpeg video stream Mjpeg SettingsPAL/50 Hz Video AdjustmentDay/Night Vision OptionsOption Description Controls section on Audio WindowDuplex Talk and Listen Full Duplex Talk and Listen Privacy Region WindowFocus/Zoom Window Choose Simplex Talk Only , Half Duplex Talk or Listen , orInitialization Window Security WindowsInitialization Window, Complexity Window, Users Window section on Complexity WindowMail/FTP/HTTP Window Applications WindowsSecondary Smtp Server Described in the Basic Setup Window section onMail Setup Primary Smtp ServerHttp Notification Mail BodyPrimary FTP Secondary FTPSystem-provided-name-value-pairs is the event information Motion Detection WindowEvent Window Trigger Event Event ScheduleNew Schedule Clear buttonAttachment Mail/FTP/HTTP Window section onSnmp Window Manual Control Settings Alarm I/O Ports WindowAlarm Input Settings Alarm Output SettingsSystem Window Status WindowsSystem Status Audio/Video Window Audio SettingSyslog & Log Window Network WindowSys Log Server Local LogMessage Explanation Log ListSystem log messages Syslog and Log Information Address FTP log messages Address1 Port1 Address2 Port2 , UserSmtp log messages Video Log WindowDelete All button Delete buttonOL-24128-02 Home Window Overview Viewing Video through the Home Window OverviewHome Window Audio controls Home Window ControlsControl Description Digital zoom controlsFor related information, see the Video Window section on Snapshot controlsSave IP camera controlsAccessing Secondary H.264 Stream Accessing the Primary H.264 StreamViewing Video through Third-Party Devices or Software Accessing Dual Streams H.264 + Mjpeg Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing the Mjpeg StreamAccessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting For instructions, see the Video Window section on Using the IP Camera with Cisco VSMOL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8