Cisco Systems CIVIS-IPC-2611 manual Mail/FTP/HTTP Window section on, Attachment

Chapter 3 Configuring and Managing the IP Camera

Applications Windows

Table 3-17	Event Window Options (continued)
Option		Description
Actions		Choose the desired options to designate actions that the camera takes when
		events occur:
		• E-Mail—Sends e-mail event notification messages to an SMTP server.
		The e-mail messages notify you that an event has occurred, and may
		include a video file of the event and the URL of an FTP server from
		which you can download the video file. (The e-mail event notification
		messages must be configured as described in the “Mail/FTP/HTTP
		Window” section on page 3-27.)
		• FTP—Uploads an event video file to an FTP server. (The FTP server
		must be configured as described in the “Mail/FTP/HTTP Window”
		section on page 3-27.)
		• Alarm Output 1—Applies to output port 1 on the IP camera. Causes the
		output port state to be activated as configured. (For more information
		about output ports, see the “Alarm I/O Ports Window” section on
		page 3-35.)
		• Alarm Output 2—Applies to output port 2 on the IP camera. Causes the
		output port state to be activated as configured (For more information
		about output ports, see the “Alarm I/O Ports Window” section on
		page 3-35.)
		• HTTP—Causes the video file to be sent to an HTTP server. (The HTTP
		notification server must be configured as described in the
		“Mail/FTP/HTTP Window” section on page 3-27.)
		• Interval—Choose the amount of time, in minutes, that the camera waits
		after detecting a condition before it triggers an event. A setting of 0
		indicates no delay.
Attachment

Note These Attachment options appear if you enable the Trigger Event option and choose the E-Mail or FTP option.

Overwrite/Replace	Check this check box to overwrite the oldest video file that is stored on the
oldest video file when	IP camera with the new video file when the SDRAM on the IP camera does
SDRAM is full	not have enough room for the new file.
	If you do not check this option, the IP camera does not save new video files
	when its SDRAM does not have room for the files.
Attachment Type	Choose the type of file that is attached to an e-mail or FTP notification.
	• JPEG Image—Attaches JPEG images from the event.
	• Video—Attaches a video file of the event.
Frame Rate	Appears if you choose the JPEG Image option from the Attachment Type
	drop-down list.
	Choose the number of JPEG images that are captured per second during the
	event.

	Cisco Video Surveillance 2611 IP Dome User Guide
OL-24128-02		3-33