Cisco Systems CIVIS-IPC-2611 manual Audio Window, Controls section on, Duplex Talk and Listen

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Audio Window

The Audio window provides options for enabling and configuring audio that is transmitted to and from the IP camera. You can configure audio for these devices:

•External microphone—You can connect an optional external microphone (available from third-parties) to the IP camera. This audio is sent to the PC that you use to view video from the IP camera. You can listen to the audio when viewing video in the Home window.

•External speaker— You can connect an optional external speaker (available from third-parties) to the IP camera. This speaker plays audio that is captured by the microphone of the PC that you use to view video from the IP camera. The PC can capture and send this audio only when the Home window is open.

To display the Audio window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-8, click Audio/Video, then click Audio.

If you change any options in the Audio window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-10describes the options in the Audio window.

Table 3-10 Audio Window Options

Option	Description
Enable Audio	Check this check box to enable audio from the IP camera, and choose one of
	these options:
	• Simplex - Listen Only—Enables a simplex connection that allows you
	to receive audio from the IP camera but not transmit audio to the IP
	camera
	• Simplex - Talk Only—Enables a simplex connection that allows you to
	transmit audio to the IP camera but not receive audio from the IP camera
	• Half Duplex - Talk or Listen—Enables a half duplex connection that
	lets you receive audio from and transmit audio to the IP camera, but not
	simultaneously
	• Full Duplex - Talk and Listen—Enables a full duplex connection that
	lets you simultaneously receive audio from and transmit audio to the IP
	camera
	Note When you enable transmitting audio to the IP camera, the external
	microphone that is attached to the IP camera is muted by default. To
	unmute the microphone, use the Microphone On toggle button in
	the Home window. For detailed information, see the “Home Window
	Controls” section on page 4-3.
Enable Microphone	Display only. A check indicates that a microphone that is connected to the IP
	camera is enabled.
	The microphone is enabled when you check the Enable Audio check box and
	choose Simplex - Listen Only, Half Duplex - Talk or Listen, or Full
	Duplex - Talk and Listen.

	Cisco Video Surveillance 2611 IP Dome User Guide
OL-24128-02		3-23