Cisco Systems CIVIS-IPC-2611 manual Audio/Video Windows

Page 40

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Audio/Video Windows

The Audio/Video windows provide options for configuring audio and video from the IP camera.

The following sections describe the Audio/Video windows in detail:

Video Window, page 3-16.

Audio Window, page 3-23

Privacy Region Window, page 3-24

Focus/Zoom Window, page 3-24

Video Window

The Video window provides options for configuring the video from the IP camera. You can configure settings for the primary and an optional secondary video stream.

Configuring a secondary stream is useful for providing third-party devices or software with a video stream that is at a lower resolution than the primary. Some devices and software require this lower resolution. For related information, see the “Viewing Video through Third-Party Devices or Software” section on page 4-5.

To display the Video window, access the configuration windows as described in the “Accessing the IP Camera Windows” section on page 2-8, click, Audio/Video, then click Video.

If you change any options in the Video window, you must click Save to save the changes. To discard the changes, click Cancel before clicking Save. These buttons appear at the bottom of the window. You may need to scroll down to see them.

Table 3-9describes the options in the Video window.

 

Cisco Video Surveillance 2611 IP Dome User Guide

3-16

OL-24128-02

Image 40
Contents Cisco Video Surveillance 2611 IP Dome User Guide Americas HeadquartersCisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2611 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2611 IP DomePackage Contents Getting Started Before Your BeginInstalling the Cisco Video Surveillance 2611 IP Dome Preventing Electrostatic Discharge DamagePreparing for Installation Passing the Audio Cable through a Ferrite CoreProcedure Recessed Mounting in a Ceiling TilePlacing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Accessing the IP Camera Windows Protocol//ipaddressHttps//192.168.0.100 Https//203.70.212.521024Http//203.70.212.52 Http//203.70.212.521024Adjusting the Video Image Powering the IP Camera On or Off Adjusting the Camera Lens on the 2611 IP DomeResetting the IP Camera Cleaning the IP CameraReset Type Procedure Remarks Initial Setup of the IP CameraConfiguring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Alarm I/O Ports See the Audio Window sectionSee the Privacy Region See the Focus/Zoom WindowNavigating the Configuration Windows SnmpSetup Windows Basic Setup WindowDevice Settings Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEAP-TLS Options Eapol WindowEAP-FAST Options Users Window, Maintenance Window, Firmware Window, Administration WindowsUsers Window Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Controls section on Audio WindowDuplex Talk and Listen Privacy Region Window Focus/Zoom WindowChoose Simplex Talk Only , Half Duplex Talk or Listen , or Full Duplex Talk and ListenInitialization Window Security WindowsInitialization Window, Complexity Window, Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowDescribed in the Basic Setup Window section on Mail SetupPrimary Smtp Server Secondary Smtp ServerMail Body Primary FTPSecondary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Event Schedule New ScheduleClear button Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm I/O Ports Window Alarm Input SettingsAlarm Output Settings Manual Control SettingsSystem Window Status WindowsSystem Status Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerMessage Explanation Log ListSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24128-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Home Window Controls Control DescriptionDigital zoom controls Audio controlsSnapshot controls SaveIP camera controls For related information, see the Video Window section onAccessing Secondary H.264 Stream Accessing the Primary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Primary MPEG-4 Stream Accessing Dual MPEG-4 StreamsAccessing the Mjpeg Stream Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8