Cisco Systems CIVIS-IPC-2611 manual MPEG-4 Settings

Page 42

Chapter 3 Configuring and Managing the IP Camera

Audio/Video Windows

Table 3-9	Video Window Options (continued)

Option		Description

Max. Frame Rate		Choose the desired maximum frame rate per second for the primary video
		stream from the IP camera.
		The default values are 30 for NTSC and 25 for PAL.
		A higher maximum frame rate provides better video quality but consumes
		more bandwidth

H.264 Settings 2

Note These H.264 Settings 2 options appear if you choose the Dual H.264 Streams from the Streaming Mode drop-down list.

Resolution	Choose the resolution of the secondary video stream.

Video Quality Control	Choose an option for video quality for the secondary video stream from the
	IP camera:
	• Constant Bit Rate—Specifies that the video stream is output at or close
	to the constant bit rate that you choose. The default value is 64 Kbps. A
	higher bit rate provides better video quality but consumes more
	bandwidth.
	• Fixed Quality—Specifies that video is output at a fixed quality, which
	ranges from Very High to Very Low. The bit rate may vary to maintain
	this quality. The default fixed quality is Normal. A higher fixed quality
	provides better video quality but consumes more bandwidth.

Max. Frame Rate	Choose the desired maximum frame rate per second for the secondary video
	stream from the IP camera.
	The default values are 15 for NTSC or 15 for PAL.
	A higher maximum frame rate provides better video quality but consumes
	more bandwidth

MPEG-4 Settings 1

Note These MPEG-4 Settings options appear if you choose Single MPEG-4 Stream, Dual MPEG-4 Streams, or Dual Streams (MPEG-4 + MJPEG) from the Streaming Mode drop-down list.

Resolution

Choose the desired video resolution format for the primary video stream from the IP camera.

The default resolution is 720 x 480 for NTSC or 720 x 576 for PAL.

	Cisco Video Surveillance 2611 IP Dome User Guide
3-18	OL-24128-02

Image 42

Contents Cisco Video Surveillance 2611 IP Dome User Guide Americas HeadquartersCisco Video Surveillance 2611 IP Dome User Guide N T E N T S Using the IP Camera with Cisco VSM A-1 Organization Preface Cisco Video Surveillance 2611 IP Dome User Guide Features Features, IP Camera Overview,Physical Details, Package Contents, IP Camera OverviewPhysical Details Top of the 2611 IP DomeOverview IP Camera Overview Described in the Resetting the IP Camera section on Bottom of the 2611 IP DomePackage Contents Getting Started Before Your BeginInstalling the Cisco Video Surveillance 2611 IP Dome Preventing Electrostatic Discharge DamagePreparing for Installation Passing the Audio Cable through a Ferrite CoreProcedure Recessed Mounting in a Ceiling TilePlacing the 2611 IP Dome in a Ceiling Tile See -1 on Performing the Initial Setup of the IP Camera Accessing the IP Camera Windows Protocol//ipaddressHttp//203.70.212.52 Https//192.168.0.100Https//203.70.212.521024 Http//203.70.212.521024Adjusting the Video Image Powering the IP Camera On or Off Adjusting the Camera Lens on the 2611 IP DomeReset Type Procedure Remarks Resetting the IP CameraCleaning the IP Camera Initial Setup of the IP CameraConfiguring and Managing the IP Camera Configuration OverviewConfiguration Item Explanation Guidelines for Use Reference See the Privacy Region See the Alarm I/O PortsSee the Audio Window section See the Focus/Zoom WindowNavigating the Configuration Windows SnmpDevice Settings Setup WindowsBasic Setup Window Option DescriptionOption Description Advanced Setup Window Network SettingsOption BonjourOption Description IP Filter Window QoSEapol Window EAP-TLS OptionsEAP-FAST Options Administration Windows Users Window, Maintenance Window, Firmware Window,Users Window Administrator User ListMaintenance Window Firmware Window Audio/Video Windows Video WindowDual Streams MPEG-4 + Mjpeg -Configures MPEG-4 for SettingsMPEG-4 Settings Mjpeg Settings Resolution Choose the resolution of the Mjpeg video streamVideo Adjustment PAL/50 HzOptions Day/Night VisionOption Description Audio Window Controls section onDuplex Talk and Listen Choose Simplex Talk Only , Half Duplex Talk or Listen , or Privacy Region WindowFocus/Zoom Window Full Duplex Talk and ListenSecurity Windows Initialization WindowInitialization Window, Complexity Window, Complexity Window Users Window section onApplications Windows Mail/FTP/HTTP WindowPrimary Smtp Server Described in the Basic Setup Window section onMail Setup Secondary Smtp ServerSecondary FTP Mail BodyPrimary FTP Http NotificationMotion Detection Window System-provided-name-value-pairs is the event informationEvent Window Clear button Event ScheduleNew Schedule Trigger EventMail/FTP/HTTP Window section on AttachmentSnmp Window Alarm Output Settings Alarm I/O Ports WindowAlarm Input Settings Manual Control SettingsStatus Windows System WindowSystem Status Audio Setting Audio/Video WindowNetwork Window Syslog & Log WindowLocal Log Sys Log ServerLog List Message ExplanationSystem log messages Syslog and Log Information Address Address1 Port1 Address2 Port2 , User FTP log messagesVideo Log Window Smtp log messagesDelete button Delete All buttonOL-24128-02 Viewing Video through the Home Window Overview Home Window OverviewHome Window Digital zoom controls Home Window ControlsControl Description Audio controlsIP camera controls Snapshot controlsSave For related information, see the Video Window section onAccessing the Primary H.264 Stream Accessing Secondary H.264 StreamViewing Video through Third-Party Devices or Software Accessing the Mjpeg Stream Accessing the Primary MPEG-4 StreamAccessing Dual MPEG-4 Streams Accessing Dual Streams H.264 + MjpegAccessing Dual Streams MPEG-4 + Mjpeg OL-24128-02 Troubleshooting Troubleshooting Using the IP Camera with Cisco VSM For instructions, see the Video Window section onOL-24128-02 D E IN-2 IN-3 IN-4 IN-5 IN-6 IN-7 IN-8