Airlink101 AICN1777W user manual

-Encryption: Select the WEP option to enable the data encryption feature to secure the camera within the wireless network.

-Format: Once you enable the Encryption feature, you need to determine the encryption format by selecting ASCII or HEX. ASCII format causes each character you type to be interpreted as an eight-bit value. Hex format causes each pair of characters you type to be interpreted as an eight- bit value in hexadecimal (base 16) notation.

-Key Length: Select the WEP key length you use: 64 bits or 128 bits.

-WEP Key 1/2/3/4: Enter the WEP key(s) in the following boxes. This must match the WEP key value configured for your wireless router/AP.

If you select WPA-PSKor WPA2-PSKas the Authentication mode, you need to complete the following settings:

-Encryption: Select TKIP or AES. TKIP (Temporal Key Integrity Protocol) changes the temporal key every 10,000 packets to insure much greater security than the standard WEP security. AES (Advanced Encryption Standard) is used to ensure the highest degree of security and authenticity for digital information. This must match the encryption type configured for your wireless router/AP.

-Pre-Shared Key: Enter your wireless network key into the box, and this must match the Pre- shared key value configured for your wireless router/AP.

- 28 -