Airlink101 AICN1777W user manual Tip

Page 53

5.The information of the camera will be displayed on the window. When completed, click Preview and then click Save to return to the Device Setting window. The added camera will be displayed in the Device List.

Option	Description

Camera	You have to assign a descriptive name for the
Title	camera.

IP	Display the IP address of the camera.
Address

Port	Display the port path of the camera.

Account	Display the user name for accessing the camera.

Password	The password for accessing the camera will not be
	displayed.

Stream	Select the stream type as MPEG4, MJPEG, or H.264.
	(MPEG4 and H.264 is not supported by this model)

Record	Select Yes or No to set up recording function of the
	camera.

Preview	This window allows you to preview the image of the
Window	camera. Click Preview to view the image; click
	Disconnect to stop previewing.

TIP	You cannot set the motion detection area while adding the new camera. To set the motion
	detection area of the camera, select the desired camera and click the Modify button on the
	Device Setting window. Please refer to the following section 4.5.

- 52 -

Image 53

Contents User’s Manual Technical Support Chapter Introduction to Your Camera Checking the Package ContentsFront View Getting to Know Your CameraGpio Rear ViewFeatures and Benefits System Requirements Accessing the Camera using Web BrowserNetworking RAM 512MBInstalling the Wall Mount Kit Chapter Hardware InstallationConnecting the Camera to LAN/WLAN Applications of the Camera Setting up Your Camera Chapter Camera ConfigurationUltraView folder run Setup.exe Page Page Page IP Address Submask Page Page Viewing Image via Your Camera Method a Access Camera from SkyIPCam UtilityPage Page Basic System Basic SetupBasic Indication LEDBasic Date & Time AdministratorBasic User Date & TimeGuest Network Network Network SettingsIP Setting Ports Number Ddns SettingUPnP Deny Network IP FilterAccept WPA2-PSK Network Wireless SettingPage Select PBC Mode Recommended Network Wireless WPS SettingSelect PIN Mode Pan & Tilt Pan & Tilt Settings Pan/Tilt SettingsVideo & Audio Camera Setting up Video & AudioImage Setting 3GPP Video & Audio VideoCamera Speaker Out Video & Audio AudioCamera Microphone Event Server Event Server Setting FTPEvent Server Setting Email Network Storage Event Server Setting NASMotion Detect Event Configuration Schedule Profile Event ConfigEvent Configuration General Setting Event Configuration Motion Detect Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerSystem Reboot Factory ResetConfiguration Update FirmwareUSB Information USBUSB Dismount 10 RS-485 Control Buttons of RS-485 About the Control ButtonsInformation System Log InformationInformation Device Info Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. If the connected camera features speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Close Page Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page To view Camera Status Editing / Deleting the eMapUser management Configuring the SystemTo change the System Language To check the version number System Setting Setting up Event Server Event ConfigurationSending Email Notification Configuring Event Trigger Terminating Operation Specification Gpio Terminal Application Connector Pin AssignmentInterface Schematic MPEG4 Bandwidth Reference GuideNumbers Glossary of TermsHEX LAN Smtp Technical Support