Airlink101 AICN1777W user manual Features and Benefits

Page 6

1.3 Features and Benefits

￿MPEG4/MJPEG Dual-Codec Supported

The camera provides user with excellent images by the MPEG4/MJPEG dual-codec selectable technology, allowing user to adjust image size and quality, and bit rate according to the networking environment.

￿2-way Audio Capability

The built-in microphone of the camera provides on-the-spot audio via the Internet, allowing user to monitor the on-site voice. In addition, user can connect an external speaker to the camera to talk to people in the view from camera.

￿Day & Night Surveillance Supported

The seven Infrared LEDs around the standard lens assembly enable the camera to capture crystal clear images in dark environments or at night. When the Light Sensor detects the environmental light level as being too low, the camera captures the images in black & white mode using these infrared LEDs.

￿Optimal Viewing

With the pan/tile functions, user can easily monitor everywhere via the camera by moving the camera lens to the left/right (165/165 degrees) or up/down (90/15 degrees). In addition, user can assign up to eight positions for the camera, enabling user to move the camera lens to the desired position quickly.

￿I/O Connectors Provided

The camera provides the I/O connectors on the rear panel (IN/OUT), which provide the physical interface to send and receive digital signals to a variety of external alarm devices. User can connect a special featured device, and then configure the settings and control the device from the GPIO Trigger window of Web Configuration.

￿Remote Control Supported

By using a standard Web browser or the complimentary software SkyIPCam UltraView application, the administrator can easily change the configuration of the camera via Intranet or Internet. In addition, the camera can be upgraded remotely when a new firmware is available. The users are also allowed to monitor and take snapshots via the network.

￿Multiple Platforms Supported

The camera supports multiple network protocols, including TCP/IP, SMTP e-mail, HTTP, and other Internet related protocols. Therefore, user can use the camera in a mixed operating system environment, such as Windows 7 and Windows XP.

￿Multiple Applications Supported

Through the remote access technology, use the cameras to monitor various objects and places for one’s own purposes. For example, babies at home, patients in the hospital, offices and banks, and more. The camera can capture both still images and video clips, so that user can keep the archives and restore them at any time.

￿Supports RTSP

The camera supports RTSP (Real Time Streaming Protocol), which is a technology that allows user to view streaming media via the network. Use Quick Time player or RealPlayer to view the real-time streaming image on PC, open the Web browser and enter the RTSP link: rtsp://(IP address of the camera)/mpeg4.

- 5 -

Image 6
Contents User’s Manual Technical Support Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Front ViewRear View GpioFeatures and Benefits Networking Accessing the Camera using Web BrowserSystem Requirements RAM 512MBChapter Hardware Installation Installing the Wall Mount KitConnecting the Camera to LAN/WLAN Applications of the Camera Chapter Camera Configuration Setting up Your CameraUltraView folder run Setup.exe Page Page Page IP Address Submask Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Basic SetupBasic System Indication LEDBasic User AdministratorBasic Date & Time Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny Network Wireless Setting WPA2-PSKPage Network Wireless WPS Setting Select PIN ModeSelect PBC Mode Recommended Pan/Tilt Settings Pan & Tilt Pan & Tilt SettingsSetting up Video & Audio Image SettingVideo & Audio Camera Video & Audio Video 3GPPVideo & Audio Audio Camera MicrophoneCamera Speaker Out Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger Event Configuration Gpio TriggerConfiguration Factory ResetSystem Reboot Update FirmwareUSB USB DismountUSB Information 10 RS-485 About the Control Buttons Control Buttons of RS-485Information Information Device InfoInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. If the connected camera features speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Close Page Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap To view Camera StatusConfiguring the System User managementTo change the System Language To check the version number System Setting Event Configuration Setting up Event ServerSending Email Notification Configuring Event Trigger Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support