Airlink101 AICN1777W user manual Network Wireless Setting, WPA2-PSK

Page 28

Network >> Wireless Setting

The camera supports WLAN while you use the wireless network. Select the Enable option to enable this feature.

The camera supports Wireless feature that can connect to your wireless network. Select the Enable option to enable this feature.

￿Network ID (SSID): Keep the default setting of this option to connect the camera to any access point under the infrastructure network mode. To connect the camera to a specified access point, set a SSID for the camera to correspond with the access point’s ESSID. To connect the camera to an Ad- Hoc wireless workgroup, set the same wireless channel and SSID to match with the computer’s configuration.

Click Site Survey to display the available wireless networks, so that you can easily connect to one of the listed wireless networks.

￿Wireless Mode: Select the type of wireless communication for the camera: Infrastructure or Ad- Hoc.

￿Channel: Select the appropriate channel from the list.

￿Authentication: Select the authentication method to secure the camera from being used by

unauthorized user: Open, Shared-key, WPA-PSK, and WPA2-PSK. The following table explains the four options:

Open

The default setting of Authentication mode,

 

which communicates the key across the network.

 

 

Shared-key

Allow communication only with other devices

 

with identical WEP settings.

 

 

WPA-PSK/

WPA-PSK/WPA2-PSK is specially designed for

WPA2-PSK

the users who do not have access to network

 

authentication servers. The user has to manually

 

enter the starting password in their access point

 

or gateway, as well as in each PC on the

 

wireless network.

 

 

If you select Open or Shared-keyas the Authentication mode, you need to complete the following settings:

- 27 -

Image 28
Contents User’s Manual Technical Support Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Front ViewRear View GpioFeatures and Benefits Accessing the Camera using Web Browser System RequirementsNetworking RAM 512MBChapter Hardware Installation Installing the Wall Mount KitConnecting the Camera to LAN/WLAN Applications of the Camera Chapter Camera Configuration Setting up Your CameraUltraView folder run Setup.exe Page Page Page IP Address Submask Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Setup Basic SystemBasic Indication LEDAdministrator Basic Date & TimeBasic User Date & TimeGuest IP Setting Network SettingsNetwork Network UPnP Ddns SettingPorts Number Accept Network IP FilterDeny Network Wireless Setting WPA2-PSKPage Select PIN Mode Network Wireless WPS SettingSelect PBC Mode Recommended Pan/Tilt Settings Pan & Tilt Pan & Tilt SettingsImage Setting Setting up Video & AudioVideo & Audio Camera Video & Audio Video 3GPPCamera Microphone Video & Audio AudioCamera Speaker Out Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Configuration General Setting Event ConfigEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger Event Configuration Gpio TriggerFactory Reset System RebootConfiguration Update FirmwareUSB Dismount USBUSB Information 10 RS-485 About the Control Buttons Control Buttons of RS-485Information Device Info InformationInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. If the connected camera features speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Close Page Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap To view Camera StatusConfiguring the System User managementTo change the System Language To check the version number System Setting Event Configuration Setting up Event ServerSending Email Notification Configuring Event Trigger Terminating Operation Specification Interface Schematic Connector Pin AssignmentGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support