Airlink101 AICN1777W user manual Event Server Setting NAS, Network Storage

Page 37

Event Server Setting >> NAS

￿Network Storage

-Samba Server Address: Enter the IP address of the Network Storage server.

-Share: Assign the folder on the Network Storage server to share the files to users.

-Path: Assign the path for uploading the files on the Network Storage server. For example, /Test/.

-User Name: Enter the user name to login into the Network Storage server.

-Password: Enter the password to log in to the Network Storage server.

-Split By: When the file is too large to upload smoothly, use this option to split it by selecting File Size or Recording Time.

-When Disk Full: Select Stop Recording or Recycle – Delete Oldest Folder of File when the storage space on the Network Storage server is full.

NOTE The video recorded files in Network Storage are encoded by AVI format without Audio.

When you complete the required settings for NAS, click Test to find out if your configuration is correct or not. Once the camera connects to the server successfully, click Apply.

- 36 -

Image 37
Contents User’s Manual Technical Support Chapter Introduction to Your Camera Checking the Package ContentsFront View Getting to Know Your CameraGpio Rear ViewFeatures and Benefits System Requirements Accessing the Camera using Web BrowserNetworking RAM 512MBInstalling the Wall Mount Kit Chapter Hardware InstallationConnecting the Camera to LAN/WLAN Applications of the Camera Setting up Your Camera Chapter Camera ConfigurationUltraView folder run Setup.exe Page Page Page IP Address Submask Page Page Viewing Image via Your Camera Method a Access Camera from SkyIPCam UtilityPage Page Basic System Basic SetupBasic Indication LEDBasic Date & Time AdministratorBasic User Date & TimeGuest IP Setting Network SettingsNetwork Network UPnP Ddns SettingPorts Number Accept Network IP FilterDeny WPA2-PSK Network Wireless SettingPage Select PIN Mode Network Wireless WPS SettingSelect PBC Mode Recommended Pan & Tilt Pan & Tilt Settings Pan/Tilt SettingsImage Setting Setting up Video & AudioVideo & Audio Camera 3GPP Video & Audio VideoCamera Microphone Video & Audio AudioCamera Speaker Out Event Server Event Server Setting FTPEvent Server Setting Email Network Storage Event Server Setting NASMotion Detect Event Configuration General Setting Event ConfigEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Gpio Trigger Event Configuration Schedule TriggerSystem Reboot Factory ResetConfiguration Update FirmwareUSB Dismount USBUSB Information 10 RS-485 Control Buttons of RS-485 About the Control ButtonsInformation Device Info InformationInformation System Log Starting the Program Chapter Using Skyipcam UltraviewMain Window and Item Feature Talk On/Off. If the connected camera features speaker Number 1~8 from the Go button Adding a Camera Accessing the CameraPage TIP Close Page Editing / Deleting a Camera Viewing Image of the Camera Enabling / Disabling Recording Recording / Playing VideoConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page To view Camera Status Editing / Deleting the eMapUser management Configuring the SystemTo change the System Language To check the version number System Setting Setting up Event Server Event ConfigurationSending Email Notification Configuring Event Trigger Terminating Operation Specification Interface Schematic Connector Pin AssignmentGpio Terminal Application MPEG4 Bandwidth Reference GuideNumbers Glossary of TermsHEX LAN Smtp Technical Support