Airlink101 AICN1777W user manual Main Window and Item Feature

Page 48

5.2 Main Window and Item Feature

When you start and login to UltraView, the Main window will display as below:

The Main window provides you with the information on operating the system, as well as the control panel such as the Quick Launch buttons, and so on.

NOTE UltraView Software requires the resolution setting to be1024 x 768 or higher. For best view of the application, you are recommended to configure the resolution setting to 1024 x 768 or higher; otherwise, it cannot be displayed on the screen when launching the program.

Live View Window displays the live video of the connected camera(s).

Quick Launch Buttons are located below the Live View Window, providing you with the following quick-launch functions:

Button Function

Click to select Logout or Close UltraView Software.

Click to select Restore Recording Type, All Continuous Recording, or Stop All Recording.

Click and then select to display the View Setting window, switch to the eMap View window, or check the Camera Status.

Click to display the Playback window.

Click to display the Schedule Configuration window.

Click to configure the event settings: Event Server, Address Book, and Event Trigger.

Click to configure Device Setting and Recording Setting.

Click to set the Account, Language, and System Setting; or view the Version of the program.

- 47 -

Image 48

Contents User’s Manual Technical Support Checking the Package Contents Chapter Introduction to Your CameraGetting to Know Your Camera Front ViewRear View GpioFeatures and Benefits Accessing the Camera using Web Browser System RequirementsNetworking RAM 512MBChapter Hardware Installation Installing the Wall Mount KitConnecting the Camera to LAN/WLAN Applications of the Camera Chapter Camera Configuration Setting up Your CameraUltraView folder run Setup.exe Page Page Page IP Address Submask Page Page Method a Access Camera from SkyIPCam Utility Viewing Image via Your CameraPage Page Basic Setup Basic SystemBasic Indication LEDAdministrator Basic Date & TimeBasic User Date & TimeGuest Network Settings IP SettingNetwork Network Ddns Setting UPnPPorts Number Network IP Filter AcceptDeny Network Wireless Setting WPA2-PSKPage Network Wireless WPS Setting Select PIN ModeSelect PBC Mode Recommended Pan/Tilt Settings Pan & Tilt Pan & Tilt SettingsSetting up Video & Audio Image SettingVideo & Audio Camera Video & Audio Video 3GPPVideo & Audio Audio Camera MicrophoneCamera Speaker Out Event Server Setting FTP Event ServerEvent Server Setting Email Event Server Setting NAS Network StorageMotion Detect Event Config Event Configuration General SettingEvent Configuration Schedule Profile Event Configuration Motion Detect Trigger Event Configuration Schedule Trigger Event Configuration Gpio TriggerFactory Reset System RebootConfiguration Update FirmwareUSB USB DismountUSB Information 10 RS-485 About the Control Buttons Control Buttons of RS-485Information Information Device InfoInformation System Log Chapter Using Skyipcam Ultraview Starting the ProgramMain Window and Item Feature Talk On/Off. If the connected camera features speaker Number 1~8 from the Go button Accessing the Camera Adding a CameraPage TIP Close Page Editing / Deleting a Camera Viewing Image of the Camera Recording / Playing Video Enabling / Disabling RecordingConfiguring the Recording Settings Setting up Schedule for Recording Playback the Recording Files Configuring the eMap View Setting Page To view from eMap Page Editing / Deleting the eMap To view Camera StatusConfiguring the System User managementTo change the System Language To check the version number System Setting Event Configuration Setting up Event ServerSending Email Notification Configuring Event Trigger Terminating Operation Specification Connector Pin Assignment Interface SchematicGpio Terminal Application Bandwidth Reference Guide MPEG4Glossary of Terms NumbersHEX LAN Smtp Technical Support