Sennheiser EMP 2015 manual Special adjustments, Basic functions of the Sennheiser operating menu

Page 57

8 Special adjustments

Basic functions of the Sennheiser operating menu

With the Soundfield System, all necessary adjustments to the transmitter and receiver section settings can be made by using the SET and and buttons. The settings are indicated on the respective displays.

Important:

After turn-on, press the / buttons to switch between the factory- preset fixed frequency memories. The display starts flashing. Your selection becomes effective immediately. Press the SET button to acknowledge your selection. The flashing stops.

1.Press the SET button to enter the top menu level:

By briefly pressing SET again, you can change to the next menu. After approx. one second, the selected menu appears on the display and then the current setting of the menu is indicated.

2. Press the / buttons to adjust the settings of the selected menu:

The new setting starts flashing on the display. If you return to the previous setting, the flashing stops.

Important:

New settings become effective immediately and will be retained in memory on turn-off!

N.B.: When changing transmitter frequencies, care should be taken to avoid causing interference to other channels/users.

In the “tunE” and “Ch no” menu, the / buttons feature a “fast search” function. If you briefly press the / buttons, you can jump either forwards or backwards to the next setting. If you press and hold down a button, you can scroll through the settings.

3.Press the SET button to return to the top menu level:

Have you finished your entries? Press the SET button to return to the top menu level. The display then switches back to the standard setting.

59

Image 57

Contents Soundfield System EMP Zu dieser Bedienungsanleitung Sie haben die richtige Wahl getroffenKap. Inhalt InhaltVerwendungszweck Sicherheitshinweise LieferumfangTaschensender SK Mikrofon ME Verstärker EMP Verstärker EMP Komponenten des Soundfield SystemsTaste on / OFF Taschensender SKVerstärker InbetriebnahmeAntenne einschrauben Mikrofon MEMikrofon an Sender anschließen Sender an der Kleidung befestigenLautsprecher im Raum aufstellen Basissystem aufbauenLautsprecher anschließen Soundfield System ein- und ausschalten Tasten Der schnelle Einstieg in die BedienungAnzeigen Anzeigen im LC-Display des EmpfängersBatterieanzeige BalkenanzeigePeak-Anzeige Lautstärke des Audiogeräts einstellen Audiogeräte anschließenVerstärker mit zwei Funk-Mikrofon-Anlagen Funk-Mikrofon-Anlagen für Hörgeschädigte anschließenAusgangspegel für FM-Sender einstellen FM-Anlage testenSystem mit bis zu 8 Lautsprechern aufbauen Spezielle AnwendungenLautsprecher anschließen Aufnahmegeräte anschließen Mono-Aufnahmegeräte Stereo-AufnahmegerätAufnahmepegel einstellen Empfänger anschließen System mit mehreren Sendern aufbauen Team-TeachingSystem mit 2 Sendern und einem Wiedergabegerät auf- bauen Für das Headset-Mikrofon ME Empfehlungen und TippsFür den Taschensender SK Für optimalen EmpfangSpezielle Einstellungen Grundfunktionen des Sennheiser-BedienmenüsWichtig Empfindlichkeit einstellen nur Sender SenSitSqELCH Standardanzeige umschaltenVorgehen bei der Programmierung Festspeicherplätze programmierenFestspeicherplatz auswählen Wichtiger HinweisKanalnummer einstellen Ch noBedienung sperren Sperre einschaltenSperre aufheben Soundfield System akustisch an den Raum anpassen Poppschutz austauschen Pflege und Wartung10 Störungssuche FehlerchecklisteFehler Mögliche Ursache AbhilfeSendeantenne hat sich gelöst Empfohlenes Zubehör Speaker OUT Technische DatenEMP 2015 Soundfield System Thank you for choosing Sennheiser Contents Area of application SK 500 bodypack transmitter ME 3 headmic Delivery includesEMP 2015 receiver/amplifier combination Components of the Soundfield SystemOn / OFF button SK 500 bodypack transmitterConnecting the antenna and preparing the mains connection Setting up the EMPInserting and replacing the battery Getting readyConnecting the microphone Connecting the antennaME 3 headmic Attaching the transmitter to clothingInstalling the loudspeakers Installing the basic systemConnecting the loudspeakers Turning the system components on and off Buttons OperationLC display panels ReceiverBargraph Battery status indicationRed LED Peak indicationConnecting external audio devices Adjusting the volume of an external audio deviceMono audio devices Stereo audio device Stereo audio devices Adjusting the output level for FM transmitters Connecting FM systems for persons with impaired hearingTesting the FM system EMP 2015 with two FM systemsSpecial applications Installing a system with up to eight loudspeakersConnecting the loudspeakers Connecting sound recording devices Adjusting the recording levelMono sound recording devices Stereo sound recording device Adjusting the volume of the connected receivers Connecting an EM 500 receiverAdapting the system sensitvity to the connected receivers For the ME 3 headmic Recommendations and tipsFor the SK 500 bodypack transmitter For optimum receptionBasic functions of the Sennheiser operating menu Special adjustmentsAdjusting the sensitvity transmitter only Adjusting the squelch threshold receiver section only Selecting the content of the standard displayOperating steps for configuring a frequency memory Configuring a frequency memorySelect a frequency memory Important noteAssign a channel number Activating/deactivating the lock mode Activating the lock modeDeactivating the lock mode Acoustically adapting the Soundfield System to a room Replacing the windscreen Care and maintenanceTroubleshooting Error checklistProblem Possible cause What to do Problem Possible cause What to do Recommended accessories Line OUT Speaker OUT Specifications