Sennheiser EMP 2015 manual Specifications, Line OUT Speaker OUT

12 Specifications

EMP 2015 receiver/amplifier combination

Amplifier section

Operating voltage

Power consumption

Fuse

AF output power

Harmonic distortion (at nom. dev., 1 kHz) Line input Receiver

Output impedance

Frequency response Line input Receiver

Signal-to-noise ratio

(LINE OUT)

(SPEAKER OUT)

Temperature range Protection class Dimensions Weight

Receiver section

Modulation Frequency ranges Transmission/receiving frequencies

Switching bandwidth Noise reduction system Nominal deviation / peak deviation Sensitivity (with HDX, peak dev.) Antenna input

Antenna input impedance

230 V (EU and UK version)

115 V (US version)

<3 W (stand by)

<20 W (position “ON”)

<200 W (max. rms level)

2 AT

4 x 10 W at 4 (rms)

4 x 20 W at 4 (peak)

0.5 %

1 %

4 x 2…8 Ω

20 – 18,000 Hz

70 – 18,000 Hz

>90 dBArms

>80 dBArms

0 °C – 40 °C

2

210 x 70 x 205 mm

2,600 g

FM mono

518 – 550, 630 – 662, 740 – 772, 790 – 822, 838 – 870 MHz 1280, tunable in steps of 25 kHz,

16 switchable fixed frequency memories

32MHz Sennheiser HDX

± 24 kHz / ± 48 kHz < 2.5 µV

BNC

50Ω

SK 500 bodypack transmitter

Modulation	FM mono
Frequency ranges	518 – 550, 630 – 662, 740 – 772, 790 – 822, 838 – 870 MHz
Transmission/receiving frequencies	1280, tunable in steps of 25 kHz,
	16 switchable fixed frequency memories
Switching bandwidth	32 MHz
RF output power at 50 Ω	typ. 10 mW
Power supply	9 V PP3 alkaline manganese battery (IEC 6 LR 61) or
Max. current consumption at nom. voltage	9.6 V/160 mA rechargeable battery
	approx. 40 mA
Dimensions	110 x 65 x 22 mm
Weight	approx. 255 g

70