Sennheiser EMP 2015 manual Selecting the content of the standard display

Page 59

SqELCH

Adjusting the squelch threshold (receiver section only)

The amplifier’s receiver section is equipped with an adjustable squelch which

eliminates annoying noise when the transmitter is turned off. It also suppresses

sudden noise when the transmitter leaves the reception area.

Press the SET button to select the “SqELCH” menu. “SqELCH” appears on

the display; after a short pause the current squelch setting is indicated.

With the / buttons you can now select a different setting. The squelch

can be turned off (0 dB) or adjusted in 5-dB steps from 5 dB to 40 dB.

(Selecting a smaller value reduces the squelch threshold, selecting a higher

value increases the squelch threshold.) The new setting starts flashing on

the display. Set the squelch threshold – with the transmitter turned off –

to the lowest possible value that suppresses hissing noise. With the squelch

set to a high value, the receiver section will be less sensitive to interference

but, on the other hand, the transmission range will be reduced.

Note:

If the receiver’s squelch is set to “0 dB” and you turn the transmitter off,

hissing noise with high dynamics will occur.

Press the SET button to return to the top menu level. The display then

switches back to the standard display.

DiSPL

Selecting the content of the standard display

With both transmitter and receiver section you can choose the content of the

standard display i.e. whether the frequency (in MHz) or the channel number

is displayed.

Press the SET button twice to select the “DiSPL” menu. “DiSPL” appears

on the display; after a short pause the current setting is indicated.

With the / buttons you can now choose between:

Frequency:

“FrEqu”

Channel number:

“ChAnnL”

The new setting for the standard display starts flashing on the display.

Press the SET button to return to the top menu level. The display then switches to the new standard display.

61

Image 59

Contents Soundfield System EMP Zu dieser Bedienungsanleitung Sie haben die richtige Wahl getroffenKap. Inhalt InhaltVerwendungszweck Taschensender SK Mikrofon ME Verstärker EMP SicherheitshinweiseLieferumfang Verstärker EMP Komponenten des Soundfield SystemsTaste on / OFF Taschensender SKVerstärker InbetriebnahmeSender an der Kleidung befestigen Mikrofon MEAntenne einschrauben Mikrofon an Sender anschließenLautsprecher im Raum aufstellen Basissystem aufbauenLautsprecher anschließen Soundfield System ein- und ausschalten Anzeigen im LC-Display des Empfängers Der schnelle Einstieg in die BedienungTasten AnzeigenPeak-Anzeige BatterieanzeigeBalkenanzeige Lautstärke des Audiogeräts einstellen Audiogeräte anschließenFM-Anlage testen Funk-Mikrofon-Anlagen für Hörgeschädigte anschließenVerstärker mit zwei Funk-Mikrofon-Anlagen Ausgangspegel für FM-Sender einstellenSystem mit bis zu 8 Lautsprechern aufbauen Spezielle AnwendungenLautsprecher anschließen Aufnahmepegel einstellen Aufnahmegeräte anschließenMono-Aufnahmegeräte Stereo-Aufnahmegerät Empfänger anschließen System mit mehreren Sendern aufbauen Team-TeachingSystem mit 2 Sendern und einem Wiedergabegerät auf- bauen Für optimalen Empfang Empfehlungen und TippsFür das Headset-Mikrofon ME Für den Taschensender SKWichtig Spezielle EinstellungenGrundfunktionen des Sennheiser-Bedienmenüs Empfindlichkeit einstellen nur Sender SenSitSqELCH Standardanzeige umschaltenWichtiger Hinweis Festspeicherplätze programmierenVorgehen bei der Programmierung Festspeicherplatz auswählenKanalnummer einstellen Ch noSperre aufheben Bedienung sperrenSperre einschalten Soundfield System akustisch an den Raum anpassen Poppschutz austauschen Pflege und WartungAbhilfe Fehlercheckliste10 Störungssuche Fehler Mögliche UrsacheSendeantenne hat sich gelöst Empfohlenes Zubehör Speaker OUT Technische DatenEMP 2015 Soundfield System Thank you for choosing Sennheiser Contents Area of application SK 500 bodypack transmitter ME 3 headmic Delivery includesEMP 2015 receiver/amplifier combination Components of the Soundfield SystemOn / OFF button SK 500 bodypack transmitterGetting ready Setting up the EMPConnecting the antenna and preparing the mains connection Inserting and replacing the batteryAttaching the transmitter to clothing Connecting the antennaConnecting the microphone ME 3 headmicInstalling the loudspeakers Installing the basic systemConnecting the loudspeakers Turning the system components on and off Receiver OperationButtons LC display panelsPeak indication Battery status indicationBargraph Red LEDMono audio devices Stereo audio device Stereo audio devices Connecting external audio devicesAdjusting the volume of an external audio device EMP 2015 with two FM systems Connecting FM systems for persons with impaired hearingAdjusting the output level for FM transmitters Testing the FM systemSpecial applications Installing a system with up to eight loudspeakersConnecting the loudspeakers Mono sound recording devices Stereo sound recording device Connecting sound recording devicesAdjusting the recording level Adjusting the volume of the connected receivers Connecting an EM 500 receiverAdapting the system sensitvity to the connected receivers For optimum reception Recommendations and tipsFor the ME 3 headmic For the SK 500 bodypack transmitterBasic functions of the Sennheiser operating menu Special adjustmentsAdjusting the sensitvity transmitter only Adjusting the squelch threshold receiver section only Selecting the content of the standard displayImportant note Configuring a frequency memoryOperating steps for configuring a frequency memory Select a frequency memoryAssign a channel number Deactivating the lock mode Activating/deactivating the lock modeActivating the lock mode Acoustically adapting the Soundfield System to a room Replacing the windscreen Care and maintenanceProblem Possible cause What to do TroubleshootingError checklist Problem Possible cause What to do Recommended accessories Line OUT Speaker OUT Specifications