Sennheiser EMP 2015 manual Connecting FM systems for persons with impaired hearing

Page 50

Connecting FM systems for persons with impaired hearing

You can connect an FM transmitter of an FM system of any manufacturer to each of the two line outputs (LINE OUT) .

The FM transmitter transmits the signals of one or several speakers and, if connected, an audio device to the FM receiver of the hearing impaired. As a result, the speaker doesn’t have to wear several transmitters and microphones but only the transmitter and the microphone of the Soundfield System. In addition, the use of the Soundfield System ensures excellent sound quality.

EMP 2015 with two FM systems

For connecting an FM transmitter, you require a connecting cable fitted with an RCA plug and a 3.5 mm jack plug. (Some FM transmitters are fitted with a 2.5 mm jack socket.)

￿ Connect the RCA plug of the connecting cable to one of the two RCA sockets (LINE OUT) at the rear of the EMP 2015.

￿Connect the 3.5 mm jack plug of the connecting cable to the line input of the FM transmitter.

Adjusting the output level for FM transmitters

All standard FM transmitters are fitted with a line or audio input which should be used for connecting the transmitter. In general, the line output level control (LINE OUT) on the EMP 2015 should be turned clockwise as far as possible.

Testing the FM system

Before you use an FM system for the first time, connect it to the Soundfield System as described above and test it via monitoring headphones to ensure problem-free operation.

If the speaker’s voice sounds distorted, reduce the line output level by turning control counterclockwise.

52

Image 50
Contents Soundfield System EMP Sie haben die richtige Wahl getroffen Zu dieser BedienungsanleitungInhalt Kap. InhaltVerwendungszweck Taschensender SK Mikrofon ME Verstärker EMP SicherheitshinweiseLieferumfang Komponenten des Soundfield Systems Verstärker EMPTaschensender SK Taste on / OFFInbetriebnahme VerstärkerMikrofon an Sender anschließen Mikrofon MEAntenne einschrauben Sender an der Kleidung befestigenBasissystem aufbauen Lautsprecher im Raum aufstellenLautsprecher anschließen Soundfield System ein- und ausschalten Anzeigen Der schnelle Einstieg in die BedienungTasten Anzeigen im LC-Display des EmpfängersPeak-Anzeige BatterieanzeigeBalkenanzeige Audiogeräte anschließen Lautstärke des Audiogeräts einstellenAusgangspegel für FM-Sender einstellen Funk-Mikrofon-Anlagen für Hörgeschädigte anschließenVerstärker mit zwei Funk-Mikrofon-Anlagen FM-Anlage testenSpezielle Anwendungen System mit bis zu 8 Lautsprechern aufbauenLautsprecher anschließen Aufnahmepegel einstellen Aufnahmegeräte anschließenMono-Aufnahmegeräte Stereo-Aufnahmegerät System mit mehreren Sendern aufbauen Team-Teaching Empfänger anschließenSystem mit 2 Sendern und einem Wiedergabegerät auf- bauen Für den Taschensender SK Empfehlungen und TippsFür das Headset-Mikrofon ME Für optimalen EmpfangWichtig Spezielle EinstellungenGrundfunktionen des Sennheiser-Bedienmenüs SenSit Empfindlichkeit einstellen nur SenderStandardanzeige umschalten SqELCHFestspeicherplatz auswählen Festspeicherplätze programmierenVorgehen bei der Programmierung Wichtiger HinweisCh no Kanalnummer einstellenSperre aufheben Bedienung sperrenSperre einschalten Soundfield System akustisch an den Raum anpassen Pflege und Wartung Poppschutz austauschenFehler Mögliche Ursache Fehlercheckliste10 Störungssuche AbhilfeSendeantenne hat sich gelöst Empfohlenes Zubehör Technische Daten Speaker OUTEMP 2015 Soundfield System Thank you for choosing Sennheiser Contents Area of application Delivery includes SK 500 bodypack transmitter ME 3 headmicComponents of the Soundfield System EMP 2015 receiver/amplifier combinationSK 500 bodypack transmitter On / OFF buttonInserting and replacing the battery Setting up the EMPConnecting the antenna and preparing the mains connection Getting readyME 3 headmic Connecting the antennaConnecting the microphone Attaching the transmitter to clothingInstalling the basic system Installing the loudspeakersConnecting the loudspeakers Turning the system components on and off LC display panels OperationButtons ReceiverRed LED Battery status indicationBargraph Peak indicationMono audio devices Stereo audio device Stereo audio devices Connecting external audio devicesAdjusting the volume of an external audio device Testing the FM system Connecting FM systems for persons with impaired hearingAdjusting the output level for FM transmitters EMP 2015 with two FM systemsInstalling a system with up to eight loudspeakers Special applicationsConnecting the loudspeakers Mono sound recording devices Stereo sound recording device Connecting sound recording devicesAdjusting the recording level Connecting an EM 500 receiver Adjusting the volume of the connected receiversAdapting the system sensitvity to the connected receivers For the SK 500 bodypack transmitter Recommendations and tipsFor the ME 3 headmic For optimum receptionSpecial adjustments Basic functions of the Sennheiser operating menuAdjusting the sensitvity transmitter only Selecting the content of the standard display Adjusting the squelch threshold receiver section onlySelect a frequency memory Configuring a frequency memoryOperating steps for configuring a frequency memory Important noteAssign a channel number Deactivating the lock mode Activating/deactivating the lock modeActivating the lock mode Acoustically adapting the Soundfield System to a room Care and maintenance Replacing the windscreenProblem Possible cause What to do TroubleshootingError checklist Problem Possible cause What to do Recommended accessories Specifications Line OUT Speaker OUT