Sennheiser EMP 2015 manual Problem Possible cause What to do

Problem	Possible cause	What to do
Dropouts	Antenna sensitivity is not sufficient	Use a remote or telescopic
Speaker’s voice overlaid		antenna
with background noise	Transmitting antenna is not connected	Connect the antenna
	Connection of transmitting antenna	Screw the antenna tight
	has worked loose
	Transmission frequency is not the	Set the transmitter and the
	same as the receiving frequency	receiver section to the same
		frequency
		( “Special adjustments”)

Sound is not clear / rough	Several transmitters in the same
	room or in neighboring rooms
	Microphone is covered or
	positioned too far from the mouth
	Transmission frequency is not the
	same as the receiving frequency

Check the frequency settings

(“Special adjustments”) Position the microphone at the corner of the mouth Set the transmitter and the receiver section to the same frequency

(“Special adjustments”)

￿If problems occur that are not listed in the above table, please contact your local Sennheiser agent for assistance.

68