5.2.1 Parental control
Your receiver is equipped with a parental control function.
Programmes that you have blocked in line with Points
7.1.5and 7.2 can only be viewed after a
5.2.2 Time difference to GMT (hours)
Your receiver is equipped with a clock. This is synchronised via the signal received with Greenwich Mean Time. If you have entered None (see 5.2.3) under Country, then you must simply correct the current time with regard to your local time, using the arrow keys left/right or the OK key. For Germany, this difference is +1 hour in winter, +2 hours in summer.
5.2.3 Country
This function automatically provides for the switch to Daylight Savings Time in summer, and back in winter. Use the arrow keys left/right to enter your location in the line Country.
>Press the Back key to return to the Settings menu, or press the Menu key to return to normal operation. The settings will be automatically stored in memory.
5.2.4 Antenna feed 5V
If you are using an active antenna, you will have to switch on the antenna feed (5V/100mA). The antenna will be supplied via the Terrestrial antenna input.
>Use the arrow keys left/right in this line to switch
the antenna feed on or off.
In case of overload, or if there is a short circuit in the antenna feed, this will be switched off automatically. If this occurs, please repair the fault, then switch on the antenna feed again.
5.3 Audio/Video Settings
In order to optimise the settings of your receiver for your TV set, additional settings may be made in the menu Audio/Video settings.
>Press the Menu key to call up the Main Menu.
>Use the arrow keys up/down to select the line
Settings.
>Confirm by pressing OK. The
| will be displayed. (Fig. |
|
> | Now use the arrow keys up/down to highlight the |
|
(Fig. | ||
| line Audio/Video Settings. |
|
15