TechniSat DigiPal1 manual Selecting a different language, TV/Radio switching

When switching on the receiver from standby, sound will be produced at the volume level last set.

>The volume of your receiver can be increased by using the Volume + key, or you can make it softer by using the Volume - key.

>Press the Sound on/off key to mute the sound, press the key again to switch the sound back on.

6.4 Selecting a different language

Where a programme is broadcast in several languages, or

with several sound channels ( in the information box), you can select a different language or sound channel as fol- lows:

>Press the key Language selection. If available, a list of the currently broadcast languages will be dis- played on screen. (Fig. 6-6)

>Use the arrow keys up/down to select the desired language.

>Confirm by pressing OK.

You can now listen to the programme in the language selected. Your receiver is also able to receive mono

broadcasts ( in the information box). (Fig. 6-7)

6.5 TV/Radio switching

The pre-programming includes radio programmes as well as television programmes. In Radio mode, the accompanying TV picture is switched off, and only the programme name is displayed on screen.

>Switch the receiver into Radio mode by pressing the

TV/Radio key.

The receiver will now switch to the radio programme last selected.

>Press the TV/Radio key again to switch to the TV programme most recently selected.

6.6 Return to last programme selected

>Press the Back key on the remote control to return to the previous programme selected.

>Press the key again to return to the programme viewed before.

(Fig. 6-6)

(Fig. 6-7)

19