TechniSat DigiPal1 manual Operation

	>	Confirm by pressing OK. The menu Audio/ Video
		Settings will be displayed. (Fig. 5-5)
	>	You can use the arrow keys up/down to move the
		marker within the menu, and to change the individual
		positions as indicated. When selecting a menu item
		please also note any additional notes displayed. The
		following adjustments can be made:
	5.3.1 Picture format
(Fig. 5-5)
	>	Use the arrow keys left/right to select the appro-
		priate picture format for your TV set, either 4:3 or
		16:9. This function allows the picture format to be
		adjusted automatically for your television set.
	5.3.2 Language (Audio signal)
	>	Use the arrow keys left/right in this line to select
		your preferred language. Where available, this
		function will scan for all languages being transmitted,
		and will automatically set your preferred language.
	5.3.3 TV SCART-Modus
	>	Use the arrow keys left/right in this line to select
		either FBAS or RGB, whichever is appropriate for
		your TV set. For standard sets, the default setting is
		RGB.
	5.3.4 Video system
	>	Use the arrow keys left/right in this line to select
		the broadcasting standard apprpriate to your TV set.
		The options that can be selected are PAL BG (stan-
		dard setting), PAL I and SECAM BG.

5.3.5 UHF output channel

See Point 4.4.

>Press the key Back to return to the menu Settings or press the Menu key to return to normal operation. The settings are automatically stored in memory.

6 Operation

Please note:

Before you can attend to the operation of the unit, you should, if this was not already done during the initial installation, carry out a pro- gramme search (Point 7.4), and where necessary configure the Favourites list (Point 7.1). Only when this is completed will all the digital pro- grammes available in your location be available to you.

16