Repeat (optional)
>Use the arrow key right to highlight the category
Rep.
>Confirm by pressing OK.
A selection window will be displayed, showing various suggestions for repeats.
1x Timer on
T Daily repeat
1xW Repeat once per week
>Use the arrow keys up/down to select the desired function.
>Press the OK to store the setting in memory.
Type
>Use the arrow key right to highlight the category
Type.
>Press the OK dto select the desired type in this line.
VCR
Your receiver will be switched on resp. off for the pro- gramme you have selected. If the unit was switched on by the timer, most of the functions of the remote control will be deactivated, in order to prevent acciden- tal interference with the recording.
Timer operation is indicated visually by the blinking of the LED display for control purposes.
Noting function
Your receiver will switch itself on at the time you have set as starting time, and will switch to the selected pro- gramme slot. Unlike the case of the VCR setting, the controls of the receiver remain fully functional and the unit will not be switched off at the end of the program- me.
>When you have completed the programming, press the yellow function key (Accept), in order to transfer the data to memory.
>Press the TV/Radio key to return to normal operation.
Note!!!
Ensure that the information box indicates the correct time. If this is not the case, switch to the ZDF or other major programme, then go to Standby. Switch on the receiver and leave it tuned to ZDF (or other programme broadcasting time signal) for approx. 30 seconds, so that the correct current time can be scanned into the receiver.
24