TechniSat DigiPal1 manual Changing basic programming, Configuring the programme list

7 Changing basic programming

7.1 Configuring the programme list

This chapter describes how you can change and adapt the preprogramming of your receiver as well as the Favourites programme list to suit to your own preferences. This function is also required to sort newly found programmes into the list after a programme search.

Please note the following:

Youir receiver is provided with two programme lists, the Favourites list and the Total list. The Favourites programme list contains all the programmes that you have taken into this list, using the procedure described below. The Total list contains all programmes.

This chapter also describes how you can delete a program- me, and how you can block access to a programme by means of the parental control function. When calling up the programme list by pressing the OK key, the Favourites pro- gramme list will be displayed. When you are in TV mode you can view the TV list, and when you are in Radio mode you can view the list of radio programmes.

7.1.1 Calling up a Programme list

>Press the OK key.

The Favourites programme list will be displayed. (Fig. 7-1)

7.1.2 Adding programmes to the programme list

To add programmes to the programme list selected, proceed as follows:

>Press the red function key to display a selection window that allows you to switch between the Favourites list and the Total list. This Total list contains all available programmes. You have the option of displaying the Total list sorted according to Providers or sorted alphabetically (ABC...).

>Use the arrow keys up/down to select the desired programme listing. (e.g. ABC)

>Confirm by pressing OK.

An alphabetically sorted list will now be displayed. (Fig. 7-2)

(Fig. 7-1)

(Fig. 7-2)