TechniSat DigiPal1 manual Sorting programmes, Blocking access to programmes Parental Control

Page 27

>Press the red function key (Delete).

The message “Do you really want to delete the programme(s)?” will be displayed.

>Use the arrow keys left/right to select Yes or No.

>Confirm by pressing OK.

7.1.4 Sorting programmes

To sort the programmes in your Favorites list in the order most convenient to you, proceed as follows:

>Press the OK key to call up the Favourites list.

>Press the blue function key (Change).

>Now use the arrow keys up/down to select the programme you wish to place at a different position in the list.

>Now press the yellow function key to select the function Sort. A double arrow will be displayed next to the selected programme.

>You can now use either the arrow keys up/down or the numeric keypad to move the programme to any position in the programme list.

>Press the yellow function key (Store) to store the new position of the programme in memory.

In order to select a number of programmes simultaneously, proceed as follows:

>Press the OK key to go to the Select mode.

The selected programme will now be indicated by a cross in the left margin.

>You can now proceed to select additional programmes, using the arrow keys up/down.

>When you have completed selecting the programmes you wish to, press the yellow function key (Sort).

>You can now move the selected programmes to any position in the programme list, using either the arrow keys up/down or the numeric keypad.

>Press the yellow function key (Store) to store the programme(s) at the new position.

>When you have completed configuring the programme list according to your own preference in this manner, press the Back key twice to return to normal operation.

7.1.5Blocking access to programmes (Parental Control)

You have the facility to block access to programmes. A blocked programme will only be displayed on screen once the programme has been selected, after which the PIN code must be entered. Once this code has been entered, the restriction remains de-activated until the receiver is switched off (Standby).

27

Image 27
Contents EPG Contents Page Illustrations Remote controlFront view Disconnecting the unit Please read this firstDisposal instructions Safety precautions Important notes on operation Initial installationPage Page Connection to a television set Mains power connectionConnections Connection to the antennaSetting the UHF output channel Serial interface RS Adjusting the antennaInstallation Basic settingsOSD Language Country Audio/Video SettingsParental control Time difference to GMT hoursOperation Using the programme list Switching on and offUsing the Programme up/down keys Using the numeric keypadInformation box Volume controlSelecting a list Selecting blocked programmesTV/Radio switching Selecting a different languageReturn to last programme selected Channel Information Using the Videotext decoder of your televisi- on setDisplay Time and Programme Information Additional Programme InformationProgramme preview for following days Using the internal Videotext decoderElectronic Programme Guide Calling up Electronic Programme GuideProgramming by means of EPG TimerEPG Information Exiting from EPGManual Programming / changing timer settings VCR Adding programmes to the programme list Configuring the programme listChanging basic programming Calling up a Programme listDeleting from the Total list Deleting programmes Deleting from the Favourites listSorting programmes Blocking access to programmes Parental ControlChanging the PIN Cancelling parental control for individual programmes Programme searchAutomatic Search Extended search After the Search Calling up factory settings/Delete All Activating Factory/Default SettingDelete All Programmes Technical Terms System configurationScart Technical DataTHD Trouble-shooting guide Problem Possible cause Solution For everyday use Volume adjustmentSwitching on and off Programme selection Using the Programme up/down keys